AC4790-200A-485 Laird Technologies, AC4790-200A-485 Datasheet - Page 14

• Manufacturer Part Number: AC4790-200A-485
• Description: TXRX 900MHZ 3.3-5.5V FHSS 200MW
• Manufacturer: Laird Technologies
• Series: AeroCommr

Specifications of AC4790-200A-485

• Frequency: 902MHz ~ 928MHz
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: FHSS, FSK
• Applications: AMR, Fire & Security Alarms, Telemetry
• Power - Output: 5mW ~ 200mW
• Sensitivity: -110dBm
• Voltage - Supply: 3.3V, 5V
• Current - Transmitting: 68mA
• Data Interface: Connector, 2 x 10 Header
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Wireless Frequency: 900 MHz
• Interface Type: 20-pin mini connector
• Board Size: 49 mm x 42 mm x 5 mm
• Modulation: FHSS, FSK
• Security: 1 byte System ID, DES
• Operating Voltage: 3.3 V to 5.5 V
• Output Power: 200 mW
• Antenna: Integral and External Dipole
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Memory Size: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

1 0
T H E O R Y O F O P E R A T I O N
Note: This is the default case with which the radio ships and works well for almost all applications.
Case 4: In this case, a radio loads its Session Count with the remote radio's current Session Count. This is suitable for
daisy chain applications and large networks in which radios cannot stay in session longer than needed.
C o m m a n d M o d e
A radio will enter Command Mode when data is received over the serial interface from the OEM Host and either the
Command/Data pin (pin 17) is logic Low or the received data contains the “AT+++” (Enter AT Command Mode)
command. Once in Command Mode, all data received by the radio is interpreted as command data. Command Data
can be either EEPROM Configuration or On-The-Fly commands.