ETRX2-PA Telegesis Ltd, ETRX2-PA Datasheet - Page 14

• Manufacturer Part Number: ETRX2-PA
• Description: MODULE ZIGBEE W/PWR AMP
• Manufacturer: Telegesis Ltd

Specifications of ETRX2-PA

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee
• Applications: ISM
• Power - Output: 18dBm
• Sensitivity: -96dBm
• Voltage - Supply: 2.7 V ~ 3.5 V
• Current - Receiving: 37mA
• Current - Transmitting: 106mA
• Data Interface: PCB, Surface Mount
• Memory Size: 128kB Flash, 5kB SRAM
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Module Applications: AMR, Building Automation, Wireless Sensor Network, M2M Industrial Controls
• Mcu Supported Families: EM250
• Processor Type: EM250
• Wireless Protocol: IEEE 802.15.4
• Data Rate: 250Kbps
• Module Interface: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 920-1001-2

ETRX2PA
6.2 Software Interface
Using the default firmware the ETRX2-PA is controlled using a simple AT-style command interface
and (mostly) non-volatile S-Registers.
In order to get a full listing of all the available AT-
Commands, please refer to the AT command dictionary document which corresponds to the
firmware revision you intend to use.
In addition to the command dictionary there are user guides explaining the features of the firmware
in more detail. If you need to find out which firmware resides on your module simply type “ ATI ”
followed by a carriage return and you will be prompted with the module’s manufacturing
information.
The Development Kit manual describes how to upgrade the firmware either via a serial link or over
the air.
©2009 Telegesis (UK) Ltd
- 14 -
ETRX2PA Product Manual (Rev 1.07)