AC4490-200M Laird Technologies, AC4490-200M Datasheet - Page 37

• Manufacturer Part Number: AC4490-200M
• Description: TXRX 900MHZ 3.3-5.5V TTL 200MW
• Manufacturer: Laird Technologies
• Series: AeroCommr

Specifications of AC4490-200M

• Frequency: 902MHz ~ 928MHz
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: FHSS, FSK
• Applications: AMR, Fire & Security Alarms, Telemetry
• Power - Output: 5mW ~ 200mW
• Sensitivity: -110dBm
• Voltage - Supply: 3.3V, 5V
• Current - Transmitting: 68mA
• Data Interface: Connector, 2 x 10 Header
• Antenna Connector: MMCX
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Output Power: 200 mW
• Antenna: Integral and External Dipole
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Memory Size: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: AC4490-200M-01

AC4490 User’s Manual
C O M M A N D D E S C R I P T I O N S
E n t e r AT C o m ma n d M o d e
Prior to sending this command, the OEM Host must ensure that the
transceiver’s RF transmit buffer is empty. If the buffer is not empty, the
radio will interpret the command as data and it will be sent over the RF.
This can be accomplished by waiting up to one second between the
last packet and the AT command.
Note: RF Packet Size must be set to a minimum of six to use this
command.
E x it A T C o m m an d M o d e
The OEM Host should send this command to exit AT Command mode
and resume normal operation.
S t a t u s R eq u e st
The OEM Host issues this command to request the status of the
transceiver.
C h a n g e C h a n n e l
The OEM Host issues this command to change the channel of the
transceiver.
C ha n g e S er ve r / C li en t
The OEM Host issues this command to change the mode of the
transceiver from Server to Client and vice versa.
www.aerocomm.com
Command: <0x41> <0x54> <0x2B> <0x2B> <0x2B> <0x0D>
Number of Bytes Returned: 4
Response: <0xCC> <0x43> <0x4F> <0x4D>
Command: <0xCC> <0x41> <0x54> <0x4F> <0x0D>
Number of Bytes Returned: 4
Response: <0xCC> <0x44> <0x41> <0x54>
Command: <0xCC> <0x00> <0x00>
Number of Bytes Returned: 3
Response: <0xCC> <Version> <Status>
Parameter Range:
<Version>
<Status>
Command: 0xCC 0x02 <Channel>
Number of Bytes Returned: 2
Response: 0xCC <Channel>
Parameter Range:
<Channel> = RF Channel in use
Command: <0xCC> <0x03> <Mode>
Number of Bytes Returned: 3
Response: <0xCC> <Version> <Mode>
Parameter Range:
<Mode>
<Version>
= Firmware version of radio
= 0x00: Server
= 0x00: Server
= Firmware version of radio
0x01: Client in Range
0x03: Client out of Range
0x03: Client
C O N F I G U R I N G T H E A C 4 4 9 0
3 1