AD9861BCPZ-50 Analog Devices Inc, AD9861BCPZ-50 Datasheet - Page 9

• Manufacturer Part Number: AD9861BCPZ-50
• Description: IC FRONT-END MIXED SGNL 64-LFCSP
• Manufacturer: Analog Devices Inc

Specifications of AD9861BCPZ-50

• Rf Type: WLL, WLAN
• Features: 10-bit ADC(s), 10-bit DAC(s)
• Package / Case: 64-LFCSP
• Supply Voltage Range: 2.7V To 3.6V
• Logic Case Style: LFCSP
• No. Of Pins: 64
• Operating Temperature Range: -40°C To +85°C
• Msl: MSL 3 - 168 Hours
• Termination Type: SMD
• Interface: SPI
• No. Of Channels: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Frequency: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Pin No.
34
35–44
45
46
47
48
52
54, 55
56
57, 58
60
62
63
64
1
2
3
Underlined pin names and descriptions apply when the device is configured without a serial port interface, referred to as no SPI mode.
Pin function depends if the serial port is used to configure the AD9861 (called SPI mode) or if mode pins are used to configure the AD9861 (called No SPI mode). The
differences are indicated by the SPI and No SPI labels in the description column.
Some pin descriptions depend on the interface configuration, full-duplex (FD), half-duplex interleaved data (HD10), half-duplex parallel data (HD20), and a half-duplex
interface similar to the AD9860 and AD9862 data interface called clone mode (Clone). Clone mode requires a serial port interface.
Name
AUX_SPI_CLK
L9–L0
AUX3
RESET
AUX_ADC_REF
CLKIN
REFB
VIN+B, VIN−B
VREF
VIN−A, VIN+A
REFT
RxPwrDwn
TxPwrDwn
SPI_CS
1
Description
CLK for AuxSPI.
Lower Data Bit 9 to Lower Data Bit 0.
Configurable as either AuxADC_B or AuxDAC_C.
Chip Reset When Low.
Decoupling for AuxADC On-Chip Reference.
Clock Input.
ADC Bottom Reference.
ADC B Differential Input.
ADC Band Gap Reference.
ADC A Differential Input.
ADC Top Reference.
Rx Analog Power-Down Control.
Tx Analog Power-Down Control.
SPI: Serial Port Chip Select. At power-up or reset, this must be high.
No SPI: Tie low to disable SPI and use mode pins. This pin must be tied low.
Rev. 0 | Page 9 of 52
2, 3
AD9861