EVAL_PAN1455 Panasonic - ECG, EVAL_PAN1455 Datasheet - Page 24

• Manufacturer Part Number: EVAL_PAN1455
• Description: EVAL KIT FOR PAN1455 MODULE
• Manufacturer: Panasonic - ECG
• Type: Transceiverr

Specifications of EVAL_PAN1455

• Frequency: 2.4GHz
• For Use With/related Products: PAN1455
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PAN1455

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1455/1555
22. CAUTIONS
21. SOFTWARE
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
Software
We are able to deliver our modules with different software, for different customer application.
Before you start your mass production, please check to your best knowledge, that the used
software meets your requirements.
21.1. SPP SOFTWARE
21.2. HDP SOFTWARE
21.3. HID SOFTWARE
21.4. XXX SOFTWARE
Warnungen
Failure to do so may result in degrading of the product’s functions and damage to the product.
22.1. DESIGN NOTES
22.2. INSTALLATION NOTES
This SPP software is from our software partner company Stollmann www.stollmann.de.
Any customized objections can be handled on request.
Please refer to Reference [1] .
The Health Device Profile ES is available.
The Human Inteface Device Software ES is available.
Any other Profiles are available on request.
Designhinweise
Verarbeitungshinweise
(1)
(2)
(3)
(1) Please follow the condition written in this specification, especially the control
(2) The supply voltage has to be free of ac ripple voltage, as for example from a
(3) This product should not be stressed when installed.
(4) Heat is the major cause of shortening the life of these products. Please keep this
(5) The supply voltage should not be exceeding or reverse, and should not carry noise
(6) Please keep this product away from other high frequency circuits.
Reflow soldering is possible for twice on the condition in chapter 15.
Please set up the temperature at the soldering portion of this product according to
this reflow profile.
Carefully position the products so that their heat will not burn into printed circuit
boards or affect the other components that are susceptible to heat.
Carefully locate these products so that their temperatures will not increase due to
signals of this module.
battery or a low noise regulator output. For noisy supply voltages provide a
decoupling circuit as for example a ferrite in series connection and a blocking
capacitor to ground of at least 47uF directly at the module.
product away from heat.
Avoid assembly and use of the target equipment in conditions where the products'
temperature may exceed the maximum allowable.
and spike.
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENW89815C3KF/ENW89815A3KF
Produktspezifikation
No.
DS-1x55-2400-102
PAGE
Seite
DATE
Datum
www.pedeu.pansonic.de
28.08.2009
24 of 34
REV.
0.95