EVAL_PAN1455 Panasonic - ECG, EVAL_PAN1455 Datasheet - Page 12

• Manufacturer Part Number: EVAL_PAN1455
• Description: EVAL KIT FOR PAN1455 MODULE
• Manufacturer: Panasonic - ECG
• Type: Transceiverr

Specifications of EVAL_PAN1455

• Frequency: 2.4GHz
• For Use With/related Products: PAN1455
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PAN1455

1
2
3
4
5
CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER’S CODE
PAN1455/1555
subject to firmware support, contact Stollmann for current status.
subject to hardware support, contact Stollmann for availability of variants
subject to firmware support, contact Stollmann for current status
subject to firmware support, contact Stollmann for current status
subject to firmware support, contact Stollmann for current status
PANASONIC ELECTRONIC DEVICES EUROPE GMBH
7.5. 3-WIRE SERIAL INTERFACE
7.6. USB INTERFACE
7.7. GPIO INTERFACE
7.8. ADC
7.9. DAC
7.10. PCM INTERFACE
When using only GND and UART_Rx, UART_Tx serial lines, you may leave UART_RTS#
and UART_CTS# open.
Note: Not using flow control can result in loss of data.
7.6.1.
PAN1455/1555 contain a full speed USB version 2.0 compliant interface capable of directly
driving an USB cable. The PAN1455/1555 operates as a USB peripheral and responds to
requests from a USB master host controller.
It is possible to use the programmable digital I/Os GPIO[0:17]. The Current from GPIO[17] is
limited to 3mA max.
For 5V tolerant GPIO´s refer to chapter 6.2.1 SPP configuration DCE Mode
It is possible to use the programmable I/Os PIO[0:3,6,7,13:15] as ADC.
The 12-bit ADC is a successive approximation analogue-to-digital converter. A/D conversion
can be performed in single, continuous, scan or discontinuous mode.
It is possible to use the programmable I/Os PIO[2,3] as ADAC
The DAC module is a 12-bit, voltage output digital-to-analogue converter. The DAC can be
configured in 8- or 12-bit mode and may be used in conjunction with the DMA controller.
PCM or Pulse Code Modulation is a sampling technique for digitising analogue signals.
The PCM interface for voice applications is provided via the PCM_OUT, PCM_IN, PCM_CLK
and PCM_SYNC pins.
The PCM interface can act as master or as slave device.
In master mode, clock frequencies of 128kHz, 256kHz or 512kHz can be generated, when
using the internal 4MHz clock. In slave mode, clock frequencies up to 2048kHz are accepted.
The Frame Clock is 8kHz. Long and Short Frame Sync are supported.
PAN1455/1555 interface directly to PCM audio devices including the following:
3
4
USB_DP, USB_DN
CLASS 2 BLUETOOTH MODULE
Bluetooth Modul der Klasse 2
1,2
5
PRODUCT SPECIFICATION
PANASONIC’S CODE
ENW89815C3KF/ENW89815A3KF
Produktspezifikation
No.
DS-1x55-2400-102
PAGE
Seite
DATE
Datum
www.pedeu.pansonic.de
28.08.2009
12 of 34
REV.
0.95