ETRX3DVKA357 Telegesis Ltd, ETRX3DVKA357 Datasheet - Page 12

• Manufacturer Part Number: ETRX3DVKA357
• Description: KIT DEVELOPMENT FOR ETRX357
• Manufacturer: Telegesis Ltd
• Type: ZigBit™r

Specifications of ETRX3DVKA357

• Frequency: 2.4GHz
• Kit Contents: 3x ETRX35xDV Development Boards, 3x USB Cables, 2x ETRX35x On Carrier Boards, 2x ETRX35xHR Boards
• Mcu Supported Families: ETRX3
• Silicon Manufacturer: Telegesis
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: ETRX357
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 920-1009; ETRX2DVK357

9 The Carrier Board
The ETRX35x carrier board has two LEDs.
Programming Connector:
ETRX35x module from an Ember InSight Adaptor.
Watch crystal: an optional 32kHz crystal and its associated capacitors can be fitted at X3, C1
and C2. In this case, R14 and R15 should be removed from the main development board. The
use of this crystal is dependent on the user’s firmware and the latest Ember documentation should
be consulted for details of the circuit design.
10 Driver Installation and Operation
The ETRX35x development board uses the same USB-to-serial device as the ETRX2 products, so
the
www.telegesis.com/telegesis_zigbee_technology_-_technical_support_/software_download.htm
will generate a virtual COM port allowing easy access to the serial port of the embedded ETRX35x.
The development kit board and the USB stick use the same drivers so you only need to install
them once.
10.1 Windows 9x/XP/2k Driver Installation
Install the drivers before connecting the development kit using the provided USB cable. The driver
package should be unzipped into a local folder. When executing the file ‘TgVCPInstaller.exe’ an
installer will guide you through the steps required for the driver installation. If prompted that the
driver hasn’t passed the Windows logo test simply press ‘Continue Anyway’.
©2010 Telegesis (UK) Ltd
same
USB
drivers
Pin
PA6
PA7
can
The 10-way programming connector X4 is used to program the
be
Table 5. Carrier board LEDs
Figure 8. The carrier board
Carrier board functionality
LED1
LED2
used.
- 12 -
The
ETRX35xDVK Product Manual (Rev 1.01)
ETRX2USB
ETRX35x Development Kit
drivers
obtainable
from