1000-TCB1C470 Silicon Laboratories Inc, 1000-TCB1C470 Datasheet - Page 3

• Manufacturer Part Number: 1000-TCB1C470
• Description: BOARD EVALUATION FOR SI1000
• Manufacturer: Silicon Laboratories Inc
• Type: Transceiver, ISMr

Specifications of 1000-TCB1C470

• Mfg Application Notes: SI1000 Code Examples AppNote
• Frequency: 470MHz
• Supply Voltage (min): 0.9 V
• Product: RF Modules
• Maximum Frequency: 915 MHz
• Output Power: 20 dBm
• Antenna: SMA
• Supply Voltage (max): 3.6 V
• For Use With/related Products: Si100x
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 336-1893

4. Connect the USB cable (which will supply power and USB communications).
5. Turn on power: SW5  ON
6. Download the LoadBoard Light code to each. (See "3. Silicon Laboratories IDE Code Download" on page 16).
7. Launch the WDS Chip Configurator application on your PC (Start  Silicon Laboratories  WDS3)
8. WDS should automatically detect the Si1000 connected via USB. The following screen will appear:
9. Click Radio Control Panel and Select.
10.Configure the radio to transmit a GFSK-modulated PN9 test message:
File location: C:\SiLabs\MCU\Examples\Si100x\EZRadioPRO\WDS_Support\lb_light.hex (Si100x) or
C:\SiLabs\MCU\Examples\Si101x\EZRadioPRO\WDS_Support\lb_light.hex (Si101x)
(Files installed automatically with the Silicon Labs IDE)
Note that the red LED, DS3, blinks when the LoadBoard Light firmware is running.
a. Select the TX state by clicking the TX button,.
b. Set the frequency (903 MHz shown).
c. Set the crystal load capacitance to 10.039 pF.
Rev. 0.1
Si1000/10 QSG
3