ATAB5428-8-WB Atmel, ATAB5428-8-WB Datasheet - Page 49

• Manufacturer Part Number: ATAB5428-8-WB
• Description: KIT DEMO 868MHZ BLACKBIRD
• Manufacturer: Atmel
• Series: Smart RFr
• Type: Transceiver, UHFr

Specifications of ATAB5428-8-WB

• Frequency: 868MHz
• Maximum Frequency: 868 MHz
• Output Power: 0 dBm to 10 dBm
• Supply Voltage (max): 6 V
• Supply Voltage (min): 3 V
• Supply Current: 21 mA
• Maximum Operating Temperature: + 85 C
• Board Size: 2 in x 3.5 in
• Minimum Operating Temperature: - 40 C
• Product: RF Modules
• For Use With/related Products: ATA5428
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ATAB-5428-8-WB

8. Transceiver Configuration
8.1
Figure 8-1.
8.2
Figure 8-2.
8.3
Figure 8-3.
4841D–WIRE–10/07
Command: Read TX/RX Data Buffer
Command: Write TX/RX Data Buffer
Command: Read Control/Status Register
SDO_TMDO
SDO_TMDO
SDO_TMDO
SDI_TMDI
SDI_TMDI
SDI_TMDI
Read TX/RX Data Buffer
Write TX/RX Data Buffer
Read Control/Status Register
SCK
SCK
SCK
CS
CS
CS
Command: Read TX/RX Data Buffer
Command: Write TX/RX Data Buffer
No. Bytes in the TX/RX Data Buffer
No. Bytes in the TX/RX Data Buffer
No. Bytes in the TX/RX Data Buffer
MSB
MSB
MSB
Command: Read C/S Register X
The configuration of the transceiver takes place via a 4-wire serial interface (CS, SCK,
SDI_TMDI, SDO_TMDO) and is organized in 8-bit units. The configuration is initiated with an
8-bit command. While shifting the command into pin SDI_TMDI, the number of bytes in the
TX/RX data buffer are available on pin SDO_TMDO. The read and write commands are followed
by one or more 8-bit data units. Each 8-bit data transmission begins with the MSB. The serial
interface is in the reset state if the level on pin CS = Low.
During a RX operation, the user can read the received bytes in the TX/RX data buffer
successively.
During a TX operation the user can write the bytes in the TX/RX data buffer successively. An
echo of the command and the TX data bytes are provided for the microcontroller on pin
SDO_TMDO.
The control and status registers can be read individually or successively.
LSB
LSB
LSB
ATA5423/ATA5425/ATA5428/ATA5429
MSB
MSB
MSB
Command: Read C/S Register Y
Write TX/RX Data Buffer
Data C/S Register X
RX Data Byte 1
TX Data Byte 1
X
LSB
LSB
LSB
MSB
MSB
MSB
Command: Read C/S Register Z
Data C/S Register Y
RX Data Byte 1
TX Data Byte 2
TX Data Byte 1
X
LSB
LSB
LSB
49