MGA-81563-TR1 Avago Technologies US Inc., MGA-81563-TR1 Datasheet - Page 9

• Manufacturer Part Number: MGA-81563-TR1
• Description: IC AMP MMIC GAAS 3V SOT-363
• Manufacturer: Avago Technologies US Inc.

Specifications of MGA-81563-TR1

• Current - Supply: 51mA
• Frequency: 100MHz ~ 6GHz
• Gain: 12.4dB
• Noise Figure: 2.8dB
• P1db: 14.8dBm
• Package / Case: SC-70-6, SC-88, SOT-363
• Rf Type: PCS, PHS, ISM, SATCOM, WLL
• Test Frequency: 2GHz
• Voltage - Supply: 2.7V ~ 3.3V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 516-1510-2

A second method illustrated in Figure 21b, is to use for-
ward-biased diodes in series with the power supply. For
example, three silicon diodes connected in series will drop
a 5-volt supply to approximately 3 volts.
The use of the series diode approach has the advantage
of less dependency on current variation in the amplifiers
since the forward voltage drop of a diode is somewhat
current independent.
Reverse breakdown diodes (e.g., Zener diodes) could also
be used as in Figure 21c. However, care should be taken
to ensure that the noise generated by diodes in either Ze-
ner or reverse breakdown is adequately filtered (e.g., by-
passed to ground) such that the diode’s noise is not added
to the amplifier’s signal.
SOT-363 PCB Footprint
A recommended PCB pad layout for the miniature SOT-
363 (SC-70) package used by the MGA-81563 is shown in
Figure 22 (dimensions are in inches). This layout provides
ample allowance for package placement by automated
assembly equipment without adding parasitics that could
impair the high frequency RF performance of the MGA-
81563. The layout is shown with a nominal SOT-363 pack-
age footprint superimposed on the PCB pads.
0.026
0.079
0.039
0.018
Dimensions in inches.
Figure 22. Recommended PCB Pad Layout for Avago’s SC70 6L/SOT-363
Products.
9