RF3800TR7 RFMD, RF3800TR7 Datasheet - Page 16

• Manufacturer Part Number: RF3800TR7
• Description: IC AMP HBT GAAS PRE-DVR 6W AIN
• Manufacturer: RFMD

Specifications of RF3800TR7

• Current - Supply: 400mA
• Frequency: 150MHz ~ 960MHz
• Gain: 14.7dB
• Noise Figure: 6.5dB
• P1db: 37dBm ~ 39.1dBm
• Package / Case: 8-LCC
• Rf Type: W-CDMA, SATCOM
• Test Frequency: 450MHz
• Voltage - Supply: 5V ~ 8V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 689-1025-2

RF3800
Carrier tape basic dimensions are based on EIA 481. The pocket is designed to hold the part for shipping and loading onto SMT
manufacturing equipment, while protecting the boyd and the solder terminals from damaging stresses. The individual pocket
design can vary from vendor to vendor, but wide and pitch will be consistent.
Carrier tape is wound or placed on a shipping reel with a diameter of either 330 mm (13 inches) or 178 mm (7 inches). The cen-
ter hub design is large enough to ensure the radius formed by the carrier tape around it does not put unnecessary stress on
the parts.
Prior to shipping, moisture sensitive parts (MSL level 2a to 5a) are baked and placed into the pockets of the carrier tape. A
cover tape is sealed over the top of the entire length of the carrier tape. The reel is sealed in a moisture barrier, ESD bag, which
is placed in a cardboard shipping box. It is important to note that unused moisture sensitive parts need to be resealed in the
moisture barrier bag. If the reels exceed the exposure limit and need to be rebaked, most carrier tape and shipping reels are
not rate as bakeable at 125°C. If baking is required, devices may be baked according to section 4, table 4-1, column 8 of Joint
Industry Standard IPC/JEDEC J-STD-033A.
The following table provides useful information for carrier tape and reels used for shipping the devices described in this docu-
ment.
Carrier Tape Drawing with Part Orientation
16 of 18
RFMD Part Number
RF3800TR13
RF3800TR7
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
Inch (mm)
Diameter
13 (330)
7 (178)
Reel
Tape and Reel Information
Inch (mm)
Diameter
2.4 (61)
4 (102)
Hub
Width
(mm)
12
12
Pocket Pitch
(mm)
8
8
Single
Single
Feed
Rev A11 DS090624
Units per
2500
Reel
750