BGA2716,115 NXP Semiconductors, BGA2716,115 Datasheet - Page 4

• Manufacturer Part Number: BGA2716,115
• Description: MMIC AMPLIFIER SOT-363
• Manufacturer: NXP Semiconductors
• Type: Generic 50 Ohm Gain Blockr

Specifications of BGA2716,115

• Package / Case: SC-70-6, SC-88, SOT-363
• Current - Supply: 15.9mA
• Frequency: 50MHz ~ 3.6GHz
• Gain: 22.9dB
• Noise Figure: 5.3dB
• P1db: 8.9dBm
• Rf Type: ISM
• Test Frequency: 1GHz
• Voltage - Supply: 5 V ~ 6 V
• Supply Current: 15.9 mA
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-2071-2; 934057925115; BGA2716 T/R

Philips Semiconductors
8. Application information
9397 750 13292
Product data sheet
Figure 1
internally matched to 50 , and therefore does not need any external matching. The value
of the input and output DC blocking capacitors C2 and C3 should not be more than 100 pF
for applications above 100 MHz. However, when the device is operated below 100 MHz,
the capacitor value should be increased.
The nominal value of the RF choke L1 is 100 nH. At the frequencies below 100 MHz this
value should be increased. At frequencies above 1 GHz, a lower value can be used to
tune the output return loss. For optimal results, a good quality chip inductor or a
wire-wound SMD type should be chosen.
Both the RF choke and the 22 nF supply decoupling capacitor C1 should be located as
close as possible to the MMIC.
The printed-circuit board (PCB) top ground plane, connected to pins 2, 4 and 5 must be as
close as possible to the MMIC, and ideally directly beneath it. When using via holes, use
multiple via holes, located as close as possible to the MMIC.
Figure 2
Fig 1. Typical application circuit.
shows a typical application circuit for the BGA2716 MMIC. The device is
shows the PCB layout, used for the standard demonstration board.
Rev. 02 — 24 September 2004
RF input
V
S
C1
C2
RF_IN
GND1
V
S
GND2
RF_OUT
L1
C3
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
mgu436
RF output
MMIC wideband amplifier
BGA2716
4 of 14