13193EVK-A00 Freescale Semiconductor, 13193EVK-A00 Datasheet - Page 29

• Manufacturer Part Number: 13193EVK-A00
• Description: KIT ZIGBEE RF MC13193
• Manufacturer: Freescale Semiconductor
• Type: 802.15.4/Zigbeer

Specifications of 13193EVK-A00

• Contents: Hardware, Software and Documentation
• Wireless Frequency: 2.4 GHz
• Interface Type: SPI
• Modulation: DSSS OQPSK
• Security: 128 bit AES
• For Use With/related Products: MC13193
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.8.2 Flash Programming the 13192-EVB and 13192-SARD
To flash program the 13192-EVB and 13192-SARD, perform the following steps.
1. Connect the 13192-SARD or 13192-EVB to an RS232 serial COM port on the PC via the
2. Connect a power source (9V battery or the 9V power supply) to the board.
3. Power on the board. If all 4 LEDs are not on, hold down all four buttons (S101-S104 on the
4. Run the “Test Tool” utility from the Start->Programs->Freescale Zigbee->Test Tool
5. Setup the board connection by selecting the “Communications Settings” option from the
6. As shown in
Freescale Semiconductor
included serial cable.
13192-SARD and S1-S4 on the 13192-EVB) and press and release the Reset Button. Then
release the four buttons. All four LEDs should be on. The board is ready for flash
programming.
Windows menu.
“Tools” menu as shown in
In the “Device Settings” screen, click on the “Serial” button, choose the appropriate Com
Port and click on the “OK” button. Leave the Baudrate set to 19200.
Figure
Figure 9 Test Tool Window (Configuration Settings Option)
10, from the “List of Devices” screen, select the “Add Internal” option.
Figure
802.15.4 EVK User’s Guide, Rev. 0.0
9.
5-9