AD6636BC/PCB Analog Devices Inc, AD6636BC/PCB Datasheet - Page 5

• Manufacturer Part Number: AD6636BC/PCB
• Description: BOARD EVAL FOR AD6636
• Manufacturer: Analog Devices Inc

Specifications of AD6636BC/PCB

• Rohs Status: RoHS non-compliant
• Module/board Type: Evaluation Board
• For Use With/related Products: AD6636
• Lead Free Status / Rohs Status: Not Compliant

The overall filter response for the AD6636 is the composite of
all the combined filter stages. Each successive filter stage is
capable of narrower transition bandwidths but requires a
greater number of CLK cycles to calculate the output. More
decimation in the first filter stage minimizes overall power
consumption. Data from the device is interfaced to a
DSP/FPGA/baseband processor via either high speed parallel
ports (preferred) or a DSP-compatible microprocessor interface.
The AD6636 is available both in 4-channel and 6-channel
versions. The data sheet primarily discusses the 6-channel part.
The only difference between the 6-channel and 4-channel
devices is that Channel 4 and Channel 5 are not available on the
4-channel version, (see Figure 1). The 4-channel device still has
the same input ports, output ports, and memory map. The
memory map section for Channel 4 and Channel 5 can be
programmed and read back, but it serves no purpose.
Rev. A | Page 5 of 80
PRODUCT HIGHLIGHTS
•
•
•
•
•
•
•
•
•
Six independent digital filtering channels
101 dB SNR noise performance, 110 dB spurious
performance
Four input ports capable of 150 MSPS input data rates
RMS/peak power monitoring of input ports and 96 dB
range AGCs before the output ports
Three programmable RAM coefficient filters, three half-
band filters, two fixed coefficient filters, and one fifth-
order CIC filter per channel
Complex filtering and biphase filtering (300 MSPS ADC
input) by combining filtering capability of multiple
channels
Three 16-bit parallel output ports operating at up to a
200 MHz clock
Blackfin®-compatible and TigerSHARC®-compatible 16-bit
microprocessor port
Synchronous serial communications port is compatible
with most serial interface standards, SPORT, SPI, and SSR
AD6636