78M6612-DB/OMU-USB Maxim Integrated Products, 78M6612-DB/OMU-USB Datasheet - Page 15

• Manufacturer Part Number: 78M6612-DB/OMU-USB
• Description: KIT DEMO OUTLET MEASUREMENT OMU1
• Manufacturer: Maxim Integrated Products

Specifications of 78M6612-DB/OMU-USB

• Data Bus Width: 8 bit
• Interface Type: USB
• Tool Type: Demonstration Board
• Core Architecture: 8051
• Cpu Core: 80515
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

UG_6612_ 017
4.5.2.4 CLT Command
The CLT command is used for the temperature calibration. With this command, the contents of CE
register 71 are read and entered into MPU register C0 and the contents are saved to flash. The CLT
command example is given below:
>CLT<CR>
The response is:
TCal OK
>
A summary of the atomic calibration commands are given in the table below:
The commands that follow are mainly for advanced users and are included for reference only.
Rev. 1.0
CLxx
Description:
Usage:
Atomic Calibration
Commands
Allows the user to Calibrate individual sections of the IC.
CLV
CLI1
CLI2
CLI3
CLW1
CLW2
CLW3
CLP
CLP2
CLP3
CLT
6612_OMU_S2+2_URT_V1_14 Firmware Description Document
Calibrates voltage only.
Calibrate current on Outlet 1 only.
Calibrate current on Outlet 2 only.
Calibrate for current on both Outlet 1 and Outlet 2
only.
Calibrate for power on Outlet 1 only.
Calibrate for power on Outlet 2 only.
Calibrate for power on both Outlet 1 and Outlet 2.
Calibrate for phase on Outlet 1 only. Generally only
used when using current transformers.
Calibrate for phase on Outlet 2 only. Generally only
used when using current transformers.
Calibrate for phase on both Outlet 1 and Outlet 2.
Generally only used when using current transformers.
Calibrate temperature only.
15