73S8009CN-DB Maxim Integrated Products, 73S8009CN-DB Datasheet - Page 6

• Manufacturer Part Number: 73S8009CN-DB
• Description: BOARD DEMO FOR 73S8009CN
• Manufacturer: Maxim Integrated Products

Specifications of 73S8009CN-DB

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

73S8009CN Demo Board User Manual
1.3
Operation outside these rating limits may cause permanent damage to the device.
ESD testing on Card pins is HBM condition, 3 pulses, each polarity referenced to ground.
1.4
The 73S12xxF Evaluation Board has two power supplies; 3.3 V and 5.0 V. Normally, the 5.0 V supply is
tied to VPC IN on the 73S8009CN board. The 73S8009CN can supply the 3.3 V to the remainder of the
system by configuring the jumpers accordingly. The 73S8009CN VDD output can be disconnected from
the rest of the evaluation board if desired and the 3.3 V supply on the 73S12xxF Evaluation Board can be
used. See the jumper descriptions for more details.
6
Supply Voltage V
Input Voltage for Digital Inputs
Storage Temperature
Pin Voltage (except card interface)
Pin Voltage (card interface)
Pin Voltage, LIN pin
ESD Tolerance – Card interface pins
ESD Tolerance – Other pins
Pin Current
Recommended Operating Conditions and Absolute Maximum Ratings
Notes When Using a 73S12xxF Evaluation Board
Supply Voltage V
Ambient Operating Temperature
PC
Parameter
Table 1: Recommended Operating Conditions
Table 2: Absolute Maximum Ratings
Parameter
PC
2.7 to 6.5 VDC
-40 °C to +85 °C
-0.5 to 6.6 VDC
-0.3 to (V
-60 to 150 °C
-0.3 to (V
-0.3 to (V
0.3 to 6.5 VDC
± 6 kV
± 2 kV
± 200 mA
Rating
DD
DD
CC
+0.5) VDC
+0.5) VDC
+0.3) VDC
Rating
UM_8009CN_060
Rev. 1.1