GLK12232-25-SM-R14 Matrix Orbital, GLK12232-25-SM-R14 Datasheet - Page 24
![LCD GRAPHIC DISPL 122X32 WHT/BLU](/photos/13/95/139512/glk12232-25-sm_back_sml.jpg)
GLK12232-25-SM-R14
Manufacturer Part Number
GLK12232-25-SM-R14
Description
LCD GRAPHIC DISPL 122X32 WHT/BLU
Manufacturer
Matrix Orbital
Datasheet
1.GLK12232-25-SM-WB.pdf
(42 pages)
Specifications of GLK12232-25-SM-R14
Display Type
LCD - Monochrome
Display Mode
Transmissive
Viewing Area
60.20mm L x 18.00mm W
Backlight
LED - White
Dot Size
0.40mm W x 0.40mm H
Dot Pitch
0.44mm x 0.44mm
Dot Pixels
122 x 32
Interface
I²C, RS232, TTL
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
635-1000
GLK12232-25-SM
GLK12232-25-SM
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
GLK12232-25-SM-R14
Manufacturer:
Matrix Orbital
Quantity:
135
6.5.5 Clear key buffer (254 69)
changes the menu context, any following key presses may be inaccurate and can be cleared out of the buffer
between menu changes to prevent jumping around the menu tree. It may also be used to, in effect, reset the
keypad in case the host application resets for whatever reason.
6.5.6 Poll keypad (254 38)
set up to receive the key codes. When the display receives this command it will immediately return any
unbuffered keypresses which may have not been read already. If there is more than one keypress buffered
the high order bit (MSB) of this returned keycode will be set (1). If this is the only buffered keypress, then
the MSB will be reset (0). If there are no buffered keypresses, then the returned code will be 0x00. Please
note that to make use of this command the "Auto transmit keypress" mode should be off.
6.5.7 Set debounce time (254 85 [time])
piezo switches will ’bounce’ for a varying time, depending on their physical characteristics. The default
debounce time for the module is about 52 mS, which is adequate for most membrane keypads.
7 Fonts and Graphics Files
7.1 General
mation, bitmaps and system parameters; not unlike the way that a computer deals with files on a hard drive.
However, the modules use no moving parts, therefore, data is stored far more reliably than data on a home
PC.
While a PC will allow fragmentation of its files across the available file space, the Matrix Orbital file system
takes great care to ensure that all parts of a file are stored together. This system works well to maximize
storage space and operational efficiency. However, during file downloads the modules may need to spend
considerable time moving files to make room for the new file. This delay during download can be as much
as a minute, but generally it will not exceed 10 seconds.
file, the old file needs to be deleted first. We cannot know if the new file is exactly the same size as the old
file since the space vacated by the old files is filled by moving previously existing files down to fill up the
vacated space. This ensures that no file space is wasted.
Matrix Orbital
This command clears any unread keypresses. In a menuing application, if the user presses a key which
This command returns any unbuffered keypresses via the RS-232 interface. The host system must be
[time] is in increments of 6554 microseconds.
This command sets the time between key press and key read. All key types with the exception of latched
Matrix Orbital graphic modules contain a sophisticated file system for storing and retrieving font infor-
Operationally, there is one important difference between the Matrix Orbital file system and that of a PC.
When a file is being downloaded with the same ’name’ or reference number as a previously existing
GLK12232-25-SM
20