C5750X7R1H225KT5 TDK Corporation, C5750X7R1H225KT5 Datasheet - Page 12

• Manufacturer Part Number: C5750X7R1H225KT5
• Description: CAP CER 2.2UF 50V X7R 10% 2220
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C5750X7R1H225KT5

• Capacitance: 2.2µF
• Voltage - Rated: 50V
• Tolerance: ±10%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESR
• Applications: General Purpose
• Package / Case: 2220 (5750 Metric)
• Size / Dimension: 0.224" L x 0.197" W (5.70mm x 5.00mm)
• Thickness: 1.60mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Other names: 445-6121-2

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // C Series — Open Mode Design // Version A11
No.
14
15
*As for the initial measurement of capacitors (Class 2) on number 6, 10, 11, 12 and 13, leave capacitor at 150 -10, 0°C for
1 hour and measure the value after leaving capacitor for 24±2h in ambient condition.
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Life
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Performance
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X8R: 200% of initial spec. max.
500MΩ or 25MΩ•μF min., whichever
smaller. (As for the capacitors of rated
voltage 16V DC, 500 MΩ or 5MΩ•μF
min.,)
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X8R: 200% of initial spec. max.
1,000MΩ or 50MΩ•μF min.,
whichever smaller. (As for the
capacitors of rated voltage 16V DC,
1,000 MΩ or 10MΩ•μF min.,)
Characteristics
Class 2
Characteristics
Class 2
X7R
X8R
X7R
X8R
Change from the
value before test
± 15%
Change from the
value before test
± 12.5%
C Series — Open Mode Design
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Voltage conditioning:
Voltage treat the capacitors under testing temperature
and voltage for 1 hour.
Leave the capacitors in ambient condition for 24±2h
before measurement.
Use this measurement for initial value.
Reflow solder the capacitors on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply rated voltage at maximum operating temperature
±2ºC for 1,000 +48, 0h. Some items may be tested at
higher voltage (1.2x, 1.5x or 2xRV).
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Voltage conditioning:
Voltage treat the capacitors under testing temperature
and voltage for 1 hour.
Leave the capacitors in ambient condition for 24±2h
before measurement.
Use this measurement for initial value.