5230-6 Pomona Electronics, 5230-6 Datasheet - Page 82

• Manufacturer Part Number: 5230-6
• Description: BANANA PLUG HIGH TEMP 10PC BLUE
• Manufacturer: Pomona Electronics
• Type: Banana Plug, Stackabler

Specifications of 5230-6

• Gender: Male
• Contact Material: Beryllium Copper
• Plug/mating Plug Diameter: Standard
• Mounting Type: Free Hanging (In-Line)
• Termination: Solderless
• Insulation: Non-Mating End Insulated
• Features: Set Screw, Cross Hole
• Color: Blue
• Contact Finish: Nickel
• Body Material: Polyphenylene Sulfide (PPS)
• Wire Gauge: 18-22 AWG
• Operating Temperature: 150°C
• Connector Type: Banana Plug
• Contact Termination: Screw
• Voltage Rating: 5kV
• Contact Plating: Nickel
• Connector Color: Blue
• Connector Mounting: Cable
• Current Rating: 15A
• Standard: Banana Plug
• Number Of Positions / Contacts: 1
• Termination Style: Screw
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

82
Insulated Oscilloscope Probes for Portable Applications
* -2 Red, -8 Gray
1 When connected to an oscilloscope with 1 MΩ input resistance.
2 Derated with frequency.
3 For oscilloscopes with 1 MΩ input resistance.
Active Differential Probe
Pomona Model 6731 differential volt-
age probe allows users to safely make
floating high voltage measurements
while using general purpose oscillo-
scopes. Using a built-in differential
amplifier, the floating signal is convert-
ed and scaled to a low-voltage signal
referenced to earth ground. The probe
can be used on circuits associated with
electronic high-power converters,
motor speed controls, switching mode
power supplies, and other high voltage
circuits requiring isolation.
www.pomonaelectronics.com
Model#
6006-*
6033 (set)
6035-*
Attenuation
X1/X10
X10
X10
Features include switchable attenua-
tion, high impedance to ground for
both positive and negative side of the
balanced input, and maximum differen-
tial voltage up to 1000V. The probe
input uses shrouded banana test probe
tip. The output to the oscilloscope is
made with a BNC cable with a safety
insulated BNC male connector.
Oscilloscope Probes and Accessories
Bandwidth (MHz)
20/200
200
200
Resistance (MΩ)
1/10
10
10
Included with the 6731:
Large Jaw Alligator clips
(one red and one black).
Pin-Grabber Test Clips
(one red and one black).
9V Alkaline Battery.
Optional:
Model 6732: Universal
Power Adapter.
2
These passive voltage oscilloscope probes
provide additional safety for portable instru-
ment users. Pomona’s Insulated Probes pro-
vide insulation coverage for the entire probe
including the BNC connector. A spring-loaded
sheath covers the tip ground point.
Compensation point in BNC end.
• Offered in two styles:
• Cable length 4ft (1.2m).
• Model 6033 is a set of two 6006 Probes
Replacement
Accessory Kit
Input Impedance
Capacitance (pF)
6006 Fixed Attenuation X10.
6035 Switchable Attenuation X1/X10.
(one red, one gray).
47/15
15
15
Risetime (nS)
Approx.
17.5/1.8
Input Characteristics
Input Probe
Input Cable Length
Probe Ratio
Voltage to Ground
Maximum Input
Maximum Differential
Input Voltage
Maximum Floating
Voltage / Frequency
Probe Input Resistance
Probe Input Capacitance
Operating Temperature
Output Characteristics
Output Cable
Output Cable Length
Output Voltage Range
Accuracy
Bandwidth
Risetime
CMRR
Power
9V Alkaline Battery
Model 6732 Optional
Universal Power Adapter
1.8
1.8
Voltage (V Max)
Accessories Included:
Sprung Hook
Trimmer Tool
IC Tip
Insulating Tip
BNC Adapter
Replacement Tip
Ground Lead
Sheathed Banana Plug Adapter
Rating: Maximum voltage allowed on the LO
connection including shell and housing must
not exceed 30V from earth ground.
* Std. Colors: -2 Red, -8 Gray
Model# 6034-*
250
250
250
Shrouded banana test probe
60in (1.5m)
20:1 / 200:1
600V CAT III
1000V CAT II
1000 Vdc
1000 Vrms
1200V (DC + Peak AC)
600V Category III /400 Hz
(from shielding to ground)
5 MΩ (input to shielding)
10 MΩ (input to input)
6 pF (input to shielding)
5 pF (input to input)
+32 to +122°F
(0 to +50°C)
BNC cable
20in (0.5mm)
±6.5V (into 1MW)
±2.5%
DC to 20 MHz (-3 dB)
17.5 ns
20:1 @ 60Hz =>70dB
20:1 @ 1MHz =>40 dB
200:1 @ 60Hz => 80dB
200:1 @ 1 MHz =>50dB
8 hours operation. 400 hours
in standby. Unit goes into
standby mode after 30 minutes
(battery mode only).
For continuous operation
3
Compensation
Range (pF)
10-60
10-60
10-60
3