TC1016-3.3VLTTR Microchip Technology, TC1016-3.3VLTTR Datasheet - Page 8

• Manufacturer Part Number: TC1016-3.3VLTTR
• Description: IC REG LDO 3.3V 80MA SD SC70-5
• Manufacturer: Microchip Technology

Specifications of TC1016-3.3VLTTR

• Regulator Topology: Positive Fixed
• Voltage - Output: 3.3V
• Voltage - Input: Up to 6V
• Voltage - Dropout (typical): 0.15V @ 80mA
• Number Of Regulators: 1
• Current - Output: 80mA (Min)
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: SC-70-5, SC-88A, SOT-323-5, SOT-353, 5-TSSOP
• Primary Input Voltage: 6V
• Output Voltage Fixed: 3.3V
• Dropout Voltage Vdo: 150mV
• No. Of Pins: 5
• Output Current: 80mA
• Operating Temperature Range: -40°C To +125°C
• Peak Reflow Compatible (260 C): Yes
• Number Of Outputs: 1
• Polarity: Positive
• Input Voltage Max: 6 V
• Output Voltage: 3.3 V
• Output Type: Fixed
• Dropout Voltage (max): 0.2 V at 50 mA
• Line Regulation: 0.01 % / V
• Load Regulation: 0.23 %
• Voltage Regulation Accuracy: 0.5 %
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TC1016
3.0
The descriptions of the pins are listed in Table 3-1.
TABLE 3-1:
3.1
The regulator is fully enabled when a logic-high is
applied to SHDN. The regulator enters shutdown when
a logic-low is applied to this input. During shutdown, the
output voltage falls to zero and the supply current is
reduced to 0.05 µA (typ.)
3.2
For best performance, it is recommended that the
ground pin be tied to a ground plane.
3.3
Bypass the regulated voltage output to GND with a
minimum capacitance of 1 µF. A ceramic bypass
capacitor is recommended for best performance.
DS21666B-page 8
SC-70
5-Pin
1
2
3
4
5
PIN DESCRIPTIONS
Shutdown Control Input (SHDN)
Ground Terminal (GND)
Regulated Voltage Output (V
5-Pin SOT-23
Pin No.
3
4
2
5
1
PIN FUNCTION TABLE
SHDN
Name
V
GND
V
NC
OUT
IN
Shutdown control input
No connect
Ground terminal
Regulated voltage output
Unregulated supply input
OUT
)
3.4
The minimum V
to ensure that the output maintains regulation:
V
maximum V
Power dissipation may limit V
order to maintain a junction temperature below 125°C.
Refer to Section 5.0 “Thermal Considerations”, for
determining junction temperature.
It is recommended that V
ceramic capacitor.
IN
2.7V and V
Function
Unregulated Supply Input (V
IN
should be less than or equal to 6V.
IN
IN
has to meet two conditions in order
[(V
© 2005 Microchip Technology Inc.
R
IN
+ 2.5%) + V
be bypassed to GND with a
IN
to a lower potential in
DROPOUT
IN
)
]. The