TSH24IDT STMicroelectronics, TSH24IDT Datasheet - Page 5

• Manufacturer Part Number: TSH24IDT
• Description: IC AMP QUAD BIPOLAR OP 14 SOIC
• Manufacturer: STMicroelectronics

Specifications of TSH24IDT

• Amplifier Type: General Purpose
• Number Of Circuits: 4
• Slew Rate: 15 V/µs
• Gain Bandwidth Product: 25MHz
• Current - Input Bias: 100nA
• Voltage - Input Offset: 2500µV
• Current - Supply: 2.15mA
• Current - Output / Channel: 37mA
• Voltage - Supply, Single/dual (±): 3 V ~ 30 V, ±1.5 V ~ 15 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 14-SOIC (3.9mm Width), 14-SOL
• Number Of Channels: 4
• Common Mode Rejection Ratio (min): 80 dB
• Input Offset Voltage: 2.5 mV
• Input Bias Current (max): 650 nA
• Operating Supply Voltage: 5 V, 9 V, 12 V, 15 V
• Supply Current: 2.75 mA
• Maximum Power Dissipation: 500 mW
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Dual Supply Voltage: +/- 3 V, +/- 5 V, +/- 9 V, +/- 12 V
• Maximum Dual Supply Voltage: +/- 15 V
• Minimum Dual Supply Voltage: +/- 1.5 V
• Mounting Style: SMD/SMT
• Shutdown: No
• Supply Voltage (max): 30 V
• Supply Voltage (min): 3 V
• Technology: Bipolar
• Voltage Gain Db: 100 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-2321-2

APPLICATIONS INFORMATION
TSH24 IN COMPARATOR APPLICATION
The TSH24 is a quad high performances opera-
tional amplifier featuring speed of 30MHz and sin-
gle supply operation from 3V to 30V.
Most of operational amplifiers are not suited for
comparator use because of low transition speed,
output signal incompatible with standard logics
level and mainly, phase inversion.
The phase inversion occures when a strong differ-
ential signal is applied to the device inputs. The
output level is then inverted and shows a wrong
logic state. The TSH24 does not present this prob-
lematic behaviour.
Figure 1 : Basic comparator application
Figure 3 : Transition speed@ 50mV overdrive
Displayed curves below show the device re-
sponse in standard comparator configuration with-
out external components.
Transition speed : Typical transition speed under
a
50mV overdrive. V
0.2V (2k
dard logic families.
Figures 3 & 4 show output signal transition for a
50mV and 250mV input signal overdrive respec-
tively of 3 s and 1 s.
Figure 2 : Operating conditions
Figure 4 : Transition speed@ 250mV overdrive
single 5V supply voltage is about 2 s from
load) making it compatible with stan-
OH
min. is 3.7V and V
OL
TSH24
max. is
5/11