TSH80ILT STMicroelectronics, TSH80ILT Datasheet - Page 17

• Manufacturer Part Number: TSH80ILT
• Description: IC OP AMP SGL R-R WIDE SOT23-5
• Manufacturer: STMicroelectronics

Specifications of TSH80ILT

• Amplifier Type: General Purpose
• Number Of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 118 V/µs
• Gain Bandwidth Product: 65MHz
• -3db Bandwidth: 100MHz
• Current - Input Bias: 6µA
• Voltage - Input Offset: 800µV
• Current - Supply: 9.8mA
• Current - Output / Channel: 55mA
• Voltage - Supply, Single/dual (±): 4.5 V ~ 12 V, ±2.25 V ~ 6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: SOT-23-5, SC-74A, SOT-25
• Number Of Channels: 1
• Common Mode Rejection Ratio (min): 72 dB
• Input Offset Voltage: 10 mV
• Input Bias Current (max): 15 uA
• Operating Supply Voltage: 5 V, 9 V
• Supply Current: 10.5 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Dual Supply Voltage: +/- 3 V, +/- 5 V
• Maximum Dual Supply Voltage: +/- 6 V
• Minimum Dual Supply Voltage: +/- 2.25 V
• Mounting Style: SMD/SMT
• Shutdown: No
• Supply Voltage (max): 12 V
• Supply Voltage (min): 4.5 V
• Voltage Gain Db: 84 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8159-2; TSH80ILT

TSH80, TSH81, TSH82, TSH84
3.2
Video capabilities
To characterize the differential phase and differential gain a CCIR330 video line is used.
The video line contains five (flat) levels of luminance onto which the chrominance signal is
superimposed. The luminance gives various amplitudes which define the saturation of the
signal. The chrominance gives various phases which define the color of the signal.
Differential phase (or differential gain) distortion is present if a signal chrominance phase
(gain) is affected by the luminance level. The differential phase and gain represent the ability
to uniformly process the high frequency information at all luminance levels.
When a differential gain is present, color saturation is not correctly reproduced.
The input generator is the Rhode & Schwarz CCVS. The output measurement is done by
the Rhode and Schwarz VSA.
Figure 32. Measurement on Rhode and Schwarz VSA
Doc ID 9413 Rev 5
Test conditions
17/27