LF356N/NOPB National Semiconductor, LF356N/NOPB Datasheet - Page 23

• Manufacturer Part Number: LF356N/NOPB
• Description: IC OP AMP MONO WB JFET IN 8-DIP
• Manufacturer: National Semiconductor
• Series: BI-FET™r

Specifications of LF356N/NOPB

• Amplifier Type: J-FET
• Number Of Circuits: 1
• Slew Rate: 12 V/µs
• Gain Bandwidth Product: 5MHz
• Current - Input Bias: 30pA
• Voltage - Input Offset: 3000µV
• Current - Supply: 5mA
• Voltage - Supply, Single/dual (±): 10 V ~ 36 V, ±5 V ~ 18 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Through Hole
• Package / Case: 8-DIP (0.300", 7.62mm)
• Bandwidth: 5 MHz
• Common Mode Rejection Ratio: 80
• Current, Input Bias: 30 pA
• Current, Input Offset: 3 pA
• Current, Output: 25 mA
• Current, Supply: 5 mA
• Impedance, Thermal: 130 °C/W
• Number Of Amplifiers: Single
• Package Type: MDIP-8
• Power Dissipation: 670 mW
• Resistance, Input: 10^12 Ohms
• Temperature, Operating, Range: 0 to +70 °C
• Voltage, Gain: 200 V/mV
• Voltage, Input: 10 to 36 V
• Voltage, Noise: 12 nV/sqrt Hz
• Voltage, Offset: 3 mV
• Voltage, Output, High: 13 V
• Voltage, Output, Low: -13 V
• Voltage, Supply: ±16 V
• Number Of Channels: 1
• Voltage Gain Db: 106.02 dB
• Common Mode Rejection Ratio (min): 80 dB
• Input Voltage Range (max): 36 V
• Input Voltage Range (min): 10 V
• Input Offset Voltage: 10 mV at +/- 15 V
• Supply Current: 10 mA at +/- 15 V
• Maximum Power Dissipation: 670 mW
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• Maximum Dual Supply Voltage: +/- 18 V
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• Current - Output / Channel: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: *LF356N; LF356; LF356N

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
Physical Dimensions
www.national.com
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.
National Semiconductor
Corporation
Americas
Email: [e-mail]
National Semiconductor
Europe
Deutsch Tel: [phone]
English
Français Tel: [phone]
inches (millimeters) unless otherwise noted (Continued)
Email: [e-mail]
Fax: [phone]
Tel: [phone]
Molded Dual-In-Line Package (N)
NS Package Number N08E
Order Number LF356N
2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.
National Semiconductor
Asia Pacific Customer
Response Group
Tel: [phone]
Fax: [phone]
Email: [e-mail]
National Semiconductor
Japan Ltd.
Tel: [phone]
Fax: [phone]