MCP6S21-I/MS Microchip Technology, MCP6S21-I/MS Datasheet - Page 26

• Manufacturer Part Number: MCP6S21-I/MS
• Description: IC PGA 1CH R-R I/O 8MSOP
• Manufacturer: Microchip Technology

Specifications of MCP6S21-I/MS

• Package / Case: 8-MSOP, Micro8™, 8-uMAX, 8-uSOP,
• Amplifier Type: Programmable Gain
• Number Of Circuits: 1
• Output Type: Rail-to-Rail
• Slew Rate: 22 V/µs
• -3db Bandwidth: 12MHz
• Current - Input Bias: 1pA
• Voltage - Input Offset: 275µV
• Current - Supply: 1mA
• Current - Output / Channel: 30mA
• Voltage - Supply, Single/dual (±): 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Number Of Channels: Single
• Available Set Gain: 30.1 dB (Typ)
• Input Offset Voltage: 0.275 mV
• Input Bias Current (max): 0.000001 uA
• Operating Supply Voltage: 3 V, 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• No. Of Amplifiers: 1
• Bandwidth: 12MHz
• No. Of Channels: 1
• Supply Voltage Range: 2.5V To 5.5V
• Amplifier Case Style: MSOP
• No. Of Pins: 8
• Operating Temperature Range: -40°C To +85°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Gain Bandwidth Product: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MCP6S21/2/6/8
6.4
6.4.1
Figure 6-3 shows a circuit that measures the current I
It benefits from changing the gain on the PGA. Just as
a hand-held multimeter uses different measurement
ranges to obtain the best results, this circuit makes it
easy to set a high gain for small signals and a low gain
for large signals. As a result, the required dynamic
range at the PGA’s output is less than at its input (by up
to 30 dB).
FIGURE 6-3:
Current Measurement Circuit.
6.4.2
Figure 6-4 shows a circuit using an MCP6021 at a gain
of +10 in front of an MCP6S21. This changes the over-
all gain range to +10 V/V to +320 V/V (from +1 V/V to
+32 V/V).
FIGURE 6-4:
Range.
It is also easy to shift the gain range to lower gains (see
Figure 6-6). The MCP6021 acts as a unity gain buffer,
and the resistive voltage divider shifts the gain range
down to +0.1 V/V to +3.2 V/V (from +1 V/V to +32 V/V).
DS21117A-page 26
V
IN
I
X
1.11 k
Typical Applications
MCP6021
GAIN RANGING
SHIFTED GAIN RANGE PGA
10.0 k
R
S
Wide Dynamic Range
PGA with Modified Gain
MCP6S2X
MCP6S21
V
OUT
V
OUT
X
.
FIGURE 6-5:
6.4.3
Figure 6-6 gives a +1 V/V to +1024 V/V gain range,
which is much greater than the range for a single PGA
(+1 V/V to +32 V/V). The first PGA provides input mul-
tiplexing capability, while the second PGA only needs
one input. These devices can be daisy chained
(Section 5.3, “Daisy Chain Configuration”).
FIGURE 6-6:
Range.
6.4.4
The multiple channel PGAs (except the MCP6S21)
allow the user to select which sensor appears on the
output (see Figure 6-7). These devices can also
change the gain to optimize performance for each
sensor.
FIGURE 6-7:
Inputs.
V
V
IN
IN
Sensor # 0
Sensor # 1
Sensor # 5
MCP6021
EXTENDED GAIN RANGE PGA
MCP6S28
MULTIPLE SENSOR AMPLIFIER
1.11 k
PGA with lower gain range.
PGA with Extended Gain
PGA with Multiple Sensor
MCP6S26
2003 Microchip Technology Inc.
MCP6S21
10.0 k
MCP6S21
V
OUT
V
V
OUT
OUT