MCHC908GR8VFAE Freescale Semiconductor, MCHC908GR8VFAE Datasheet - Page 279

• Manufacturer Part Number: MCHC908GR8VFAE
• Description: IC MCU 8K FLASH 8MHZ 32-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MCHC908GR8VFAE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: LVD, POR, PWM
• Number Of I /o: 21
• Program Memory Size: 7.5KB (7.5K x 8)
• Program Memory Type: FLASH
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

19.4.2.2 Computer Operating Properly (COP) Reset
MC68HC908GR8 — Rev 4.0
MOTOROLA
CGMXCLK
CGMOUT
PORRST
OSC1
RST
IAB
An input to the SIM is reserved for the COP reset signal. The overflow of
the COP counter causes an internal reset and sets the COP bit in the
SIM reset status register (SRSR). The SIM actively pulls down the RST
pin for all internal reset sources.
To prevent a COP module timeout, write any value to location $FFFF.
Writing to location $FFFF clears the COP counter and bits 12 through 4
of the SIM counter. The SIM counter output, which occurs at least every
2
serviced as soon as possible out of reset to guarantee the maximum
amount of time before the first timeout.
13
CYCLES
Freescale Semiconductor, Inc.
•
•
•
•
•
4096
– 2
For More Information On This Product,
The internal reset signal is asserted.
The SIM enables CGMOUT.
Internal clocks to the CPU and modules are held inactive for 4096
CGMXCLK cycles to allow stabilization of the oscillator.
The RST pin is driven low during the oscillator stabilization time.
The POR bit of the SIM reset status register (SRSR) is set and all
other bits in the register are cleared.
4
CGMXCLK cycles, drives the COP counter. The COP should be
Figure 19-7. POR Recovery
System Integration Module (SIM)
CYCLES
Go to: www.freescale.com
32
CYCLES
32
$FFFE
System Integration Module (SIM)
Reset and System Initialization
$FFFF
Technical Data
279