C8051F350 Silicon Laboratories Inc, C8051F350 Datasheet - Page 163

• Manufacturer Part Number: C8051F350
• Description: IC 8051 MCU 8K FLASH 32LQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F35xr

Specifications of C8051F350

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 17
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x24b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-LQFP
• Data Bus Width: 8 bit
• Data Rom Size: 128 B
• On-chip Adc: 10 bit
• Number Of Timers: 16 bit
• Operating Supply Voltage: 2.7 V to 3.6 V
• Mounting Style: SMD/SMT
• Height: 1.4 mm
• Length: 7 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Width: 7 mm
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

19.6. SMBus Status Decoding
The current SMBus status can be easily decoded using the SMB0CN register. In the table below, STATUS
VECTOR refers to the four upper bits of SMB0CN: MASTER, TXMODE, STA, and STO. Note that the
shown response options are only the typical responses; application-specific procedures are allowed as
long as they conform to the SMBus specification. Highlighted responses are allowed but do not conform to
the SMBus specification.
1100
1110
Values Read
0
0
0
0
0
0
X
0
1
Current SMbus State
A master START was generated. Load slave address + R/W
A master data or address byte
was transmitted; NACK received.
A master data or address byte
was transmitted; ACK received.
Table 19.4. SMBus Status Decoding
Rev. 0.4
Typical Response Options
into SMB0DAT.
Set STA to restart transfer.
Abort transfer.
Load next data byte into
SMB0DAT.
End transfer with STOP.
End transfer with STOP and
start another transfer.
Send repeated START.
Switch to Master Receiver
Mode (clear SI without writ-
ing new data to SMB0DAT).
C8051F350/1/2/3
0
1
0
0
0
1
1
0
Written
Values
0
0
1
0
1
1
0
0
X
X
X
X
X
X
X
X
163