LPC2888FET180,551 NXP Semiconductors, LPC2888FET180,551 Datasheet - Page 30

• Manufacturer Part Number: LPC2888FET180,551
• Description: IC ARM7 MCU FLASH 1MB 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2800r

Specifications of LPC2888FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 60MHz
• Connectivity: EBI/EMI, I²C, IrDA, MMC, UART/USART, USB
• Peripherals: DMA, I²S, LCD, WDT
• Number Of I /o: 85
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.7 V ~ 3.6 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 64 KB
• Interface Type: I2C, I2S, UART, USB
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 81
• Number Of Timers: 2
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• For Use With: OM10092 - EVAL BOARD FOR LPC288X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-3246; 935281371551; LPC2888FET180-S

NXP Semiconductors
Table 6.
T
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10] Applies to 5 V tolerant pins.
[11] Accounts for 100 mV voltage drop in all supply lines.
[12] Only allowed for a short time period.
[13] Applies to pins V
[14] Applies to pins V
[15] Applies to pin V
[16] Applies to pin V
[17] Applies to pin V
[18] Applies to pins V
[19] Applies to pin V
[20] All the above tests were done on the Icetech LPC288x evaluation board. Here are the different configurations that need to be done to
LPC2880_LPC2888_3
Preliminary data sheet
Symbol
I
I
I
DD
DD
DD
amb
Typical ratings are not guaranteed. The values listed are at room temperature (+25 ˚C), nominal supply voltages.
Applies to pins V
V
External supply voltage; applies to pins V
Applies to pins V
External supply voltage; applies to pins V
Referenced to the applicable V
Including voltage on outputs in 3-state mode.
Applies to pins with a V
Applies to pins with a V
achieve the above numbers:
a) Resistors R7 and R8 on the board should be removed to reduce the power consumption on the LED’s D2 and D3.
b) The Analog-to-Digital Converter (ADC), the Dual-channel 16-bit Analog-to-Digital Converter and the Dual-channel 16-bit
c) The USB device controller is suspended.
d) All power control registers in the Clock Generation Unit have a value of 7h, and the Power Mode register in the Clock Generation Unit
e) The floating pins are set to output state.
f) The Event Router is configured in such a way that it will generate its wake-up output to the Clock Generation Unit with a rising-edge
= 40 C to +85 C, unless otherwise specified.
DD2(USB1V8)
Digital-to-Analog Converter are powered down.
has a value of 3h such that the output clocks of all spreading stages are disabled.
signal on the MODE1/P2[2] or the MODE2/P2[3].
Static characteristics
Parameter
supply current
supply current
supply current
.
DD(OSC1V8)
DD(OSC321V8)
DD(ADC3V3)
DD(DAC3V3)
DD1(CORE1V8)
DD(DADC3V3)
DD1(CORE1V8)
DD1(EMC)
DD(DADC1V8)
DD
DD
, V
.
.
.
supply of 1.8 V.
supply of 3.3 V.
.
DD2(EMC)
, V
, V
, V
, V
DD
DD(ADC3V3)
DD(DADC3V3)
DD2(CORE1V8)
DD2(CORE1V8)
for the pin, which must be present.
…continued
.
DD3(USB3V3)
, V
DD1(EMC)
.
DD(DAC3V3)
, V
, V
DD(DADC1V8)
DD1(FLASH1V8)
Conditions
32.768 kHz oscillator stops;
12 MHz oscillator runs;
external DC-to-DC
converter supplies 1.8 V
32.768 kHz oscillator runs;
12 MHz oscillator stops;
external DC-to-DC
converter supplies 3.3 V
32.768 kHz oscillator stops;
12 MHz oscillator runs;
external DC-to-DC
converter supplies 3.3 V
, V
16/32-bit ARM microcontrollers with external memory interface
, V
DD2(EMC)
Rev. 03 — 17 April 2008
, V
DD4(USB3V3)
DD5(IO3V3)
, V
, V
.
DD1(FLASH1V8)
DD2(FLASH1V8)
, V
, V
DD1(IO3V3)
DD6(IO3V3)
, V
DD2(FLASH1V8)
, V
.
DD2(IO3V3)
LPC2880; LPC2888
[20]
[20]
[20]
, V
, V
Min
-
-
-
DD(OSC1V8)
DD3(IO3V3)
, V
, V
DD4(IO3V3)
Typ
0.97
1.27
1.27
DD(OSC321V8)
[1]
© NXP B.V. 2008. All rights reserved.
.
Max
-
-
-
, V
DD1(USB1V8)
30 of 43
Unit
mA
mA
mA
,