DSPIC30F6010T-20I/PF Microchip Technology, DSPIC30F6010T-20I/PF Datasheet - Page 3

• Manufacturer Part Number: DSPIC30F6010T-20I/PF
• Description: IC PSPIC MCU/DSP 144K 80TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F6010T-20I/PF

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 144KB (48K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 4K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TQFP, 80-VQFP
• For Use With: DM300019 - BOARD DEMO DSPICDEM 80L STARTERAC164314 - MODULE SKT FOR PM3 80PFDM300020 - BOARD DEV DSPICDEM MC1 MOTORCTRLAC30F001 - MODULE SOCKET DSPIC30F 80TQFPXLT80PT2 - SOCKET TRANSITION ICE 80TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DSPIC30F6010T20IP

8.
9.
10. Table 6-3, Instruction “CP0 Ws” - Status
11. Table 6-3, Instruction “DIV.U Wm, Wn” -
12. Table 6-3, Instruction “ED Wm*Wm, Acc,
 2003 Microchip Technology Inc.
On page 5-148, the following third note should be
added to the Mov Wns to f description:
Bits
In Table 6-3, dsPIC30F Instruction Set Summary
Table, the “CP0 f” instruction on page 6-12, the “C”
and “DC” columns should be as follows:
Instruction Description - Move Wns to f
Table 6-3, Instruction “CP0 f” - Status
Bits
In Table 6-3, dsPIC30F Instruction Set Summary
Table, the “CP0 Ws” instruction on page 6-12, the
“C” and “DC” columns should be as follows:
Status Bits
In Table 6-3, dsPIC30F Instruction Set Summary
Table, the “DIV.U Wm, Wn” instruction on page
6-12, the “OV” column should be as follows:
Wx, Wy, Wxd” - Status Bits
In Table 6-3, dsPIC30F Instruction Set Summary
Table, the “ED Wm*Wm, Acc, Wx, Wy, Wxd”
instruction on page 6-12, the “OA”, “OB”, “OAB”,
“SA”, “SB” and “SAB” columns should be as
follows:
3: To move a byte of data to file register
memory, the “MOV WREG to f” instruction
(page 5-146) may be used.
“1”
“1”
“0”
OA, OB, OAB: “ ”
SA, SB, SAB: “ “
dsPIC30F Programmer’s Reference Manual
13. Table 6-3, Instruction “LSR f {,WREG}”-
14. Table 6-3, Instruction “LSR Ws,Wd”-
15. Table 6-3, Instruction “MPY Wm*Wn, Acc,
16. Table 6-3, Instruction “MPY Wm*Wm,
Status Bits
In Table 6-3, dsPIC30F Instruction Set Summary
Table, the “LSR f {,WREG}” instruction on page
6-13, the “N” column should be as follows:
Status Bits
In Table 6-3, dsPIC30F Instruction Set Summary
Table, the “LSR Ws, Wd” instruction on page 6-
13, the “N” column should be as follows:
Wx, Wxd, Wy, Wxd” - Status Bits
In Table 6-3, dsPIC30F Instruction Set Summary
Table, the “MPY Wm*Wn, Acc, Wx, Wxd, Wy,
Wyd” instruction on page 6-13, the “OA”, “OB”,
“OAB”, “SA”, “SB” and “SAB” columns should be
as follows:
Acc, Wx, Wxd, Wy, Wxd” - Status Bits
In Table 6-3, dsPIC30F Instruction Set Summary
Table, the “MPY Wm*Wm, Acc, Wx, Wxd, Wy,
Wyd” instruction on page 6-13, the “OA”, “OB”,
“OAB”, “SA”, “SB” and “SAB” columns should be
as follows:
“0”
“0”
OA, OB, OAB: “ ”
SA, SB, SAB: “ “
OA, OB, OAB: “ ”
SA, SB, SAB: “ “
DS80170A-page 3