MC68HC711E9CFNE2 Freescale Semiconductor, MC68HC711E9CFNE2 Datasheet - Page 43

• Manufacturer Part Number: MC68HC711E9CFNE2
• Description: IC MCU 8BIT 512RAM 52-PLC
• Manufacturer: Freescale Semiconductor
• Series: HC11r

Specifications of MC68HC711E9CFNE2

• Core Processor: HC11
• Core Size: 8-Bit
• Speed: 2MHz
• Connectivity: SCI, SPI
• Peripherals: POR, WDT
• Number Of I /o: 38
• Program Memory Size: 12KB (12K x 8)
• Program Memory Type: OTP
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 52-PLCC
• Processor Series: HC711E
• Core: HC11
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 2 MHz
• Number Of Programmable I/os: 38
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.13.4 Port D
2.13.5 Port E
M68HC11E Family — Rev. 3.2
MOTOROLA
CAUTION:
Pins PD5–PD0 can be used for general-purpose I/O signals. These pins
alternately serve as the serial communication interface (SCI) and serial
peripheral interface (SPI) signals when those subsystems are enabled.
Use port E for general-purpose or analog-to-digital (A/D) inputs.
If high accuracy is required for A/D conversions, avoid reading port E
during sampling, as small disturbances can reduce the accuracy of that
result.
•
•
•
PD0 is the receive data input (RxD) signal for the SCI.
PD1 is the transmit data output (TxD) signal for the SCI.
PD5–PD2 are dedicated to the SPI:
– PD2 is the master in/slave out (MISO) signal.
– PD3 is the master out/slave in (MOSI) signal.
– PD4 is the serial clock (SCK) signal.
– PD5 is the slave select (SS) input.
Pin Descriptions
Pin Descriptions
Technical Data
Port Signals
43