R5F21292SNSP#U0 Renesas Electronics America, R5F21292SNSP#U0 Datasheet - Page 109

• Manufacturer Part Number: R5F21292SNSP#U0
• Description: MCU 3/5V 16K+2K 20PIN-SSOP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/R8C/Tiny/29r

Specifications of R5F21292SNSP#U0

• Core Processor: R8C
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LED, POR, Voltage Detect, WDT
• Number Of I /o: 13
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 20-SSOP
• For Use With: R0K521276S000BE - KIT DEV RSK-R8C/26-29
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/28 Group, R8C/29 Group
Rev.2.10
REJ09B0279-0210
Table 10.3
NOTE:
Serial interface interrupt
Clock synchronous serial I/O
with chip select interrupt /
I
Key input interrupt
A/D conversion interrupt
Timer RA interrupt
Timer RB interrupt
Timer RE interrupt
INT interrupt
Voltage monitor 1 interrupt
Voltage monitor 2 interrupt
Oscillation stop detection
interrupt
2
10.5.2.4
C bus interface interrupt
1. For N, D version only.
The MCU exits wait mode by a reset or a peripheral function interrupt.
The peripheral function interrupts are affected by the CM02 bit. When the CM02 bit is set to 0 (peripheral
function clock does not stop in wait mode), all peripheral function interrupts can be used to exit wait mode.
When the CM02 bit is set to 1 (peripheral function clock stops in wait mode), the peripheral functions using the
peripheral function clock stop operating and the peripheral functions operated by external signals or on-chip
oscillator clock can be used to exit wait mode.
Table 10.3 lists Interrupts to Exit Wait Mode and Usage Conditions.
Sep 26, 2008
Interrupt
Exiting Wait Mode
Interrupts to Exit Wait Mode and Usage Conditions
Page 90 of 441
Usable when operating with
internal or external clock
Usable in all modes
Usable
Usable in one-shot mode
Usable in all modes
Usable in all modes
Usable in all modes
Usable
Usable
Usable
Usable
CM02 = 0
Usable when operating with external
clock
(Do not use)
Usable
(Do not use)
Can be used if there is no filter in
event counter mode.
Usable by selecting fOCO or fC32
as count source.
(Do not use)
Usable when operating in real time
clock mode
Usable (INT0, INT1, INT3 can be used
if there is no filter.)
Usable
Usable
(Do not use)
(1)
10. Clock Generation Circuit
CM02 = 1
(1)