ST72F264G2B6 STMicroelectronics, ST72F264G2B6 Datasheet - Page 28

• Manufacturer Part Number: ST72F264G2B6
• Description: MCU 8-BIT 8K FLASH 32-SDIP
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST72F264G2B6

• Mfg Application Notes: ST7 Checksum Capability, AN1070 App Note
• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-SDIP (0.400", 10.16mm)
• Processor Series: ST72F2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: I2C, SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 22
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST7F264-IND/USB, ST72F34X-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• For Use With: 497-6423 - BOARD EVAL BASED ON ST72264G1497-5046 - KIT TOOL FOR ST7/UPSD/STR7 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 497-5570

Release Information
8 RELEASE INFORMATION
This release supports the following peripherals and devices.
8.1 PERIPHERALS
– ADC (8-bit and 10bit): The on-chip Analog to Digital Converter (ADC) peripheral is a 10-bit,
– SCI (with/without extended Baud Rate Pre scalar): The Serial Communications Interface
– SPI: The Serial Peripheral Interface (SPI) allows fullduplex, synchronous, serial communi-
– I2C single/multi master: The Inter-Integrated Circuit Bus Interface serves as an interface be-
– I2C Slave
– 16-bit Timer: The timer consists of a 16-bit free-running counter driven by a programmable
– 8-bit Timer: The timer consists of a 8-bit free-running counter driven by a programmable
– 8-bit Lite timer: The Lite Timer can be used for general-purpose timing functions.
– PWM ART 8-bit: The Pulse Width Modulated Auto-Reload Timer on-chip peripheral consists
– AR 12-bit timer: The 12-bit Autoreload Timer can be used for general-purpose timing func-
– TBU: The Timebase unit (TBU) can be used to generate periodic interrupts.
– WDG: The Watchdog timer is used to detect the occurrence of a software fault.
– ITC: The Interrupt Controller manages the hardware and software interrupts with flexible in-
– MCC: The Main Clock Controller consists of a programmable CPU clock prescaler, a clock-
– EEPROM: The Electrically Erasable Programmable Read Only Memory can be used as a
– I/Os: An I/O port contains up to 8 pins. Each pin can be programmed independently as digital
– CAN: The Controller area Network peripheral allows communication over a CAN network.
28/235
successive approximation converter with internal sample and hold circuitry.
(SCI) offers a flexible means of full-duplex data exchange with external equipment requiring
an industry standard NRZ asynchronous serial data format.
cation with external devices.
tween the microcontroller and the serial I2C bus.
prescaler.
prescaler.
of an 8-bit auto reload counter with compare/capture capabilities and of a 7-bit prescaler
clock source.
tions.
terrupt priority and level configuration.
out signal to supply external devices and a real time clock timer with interrupt capability.
non volatile backup for storing data.
input (with or without interrupt generation) or digital output.