Z8F0822PJ020EG Zilog, Z8F0822PJ020EG Datasheet - Page 92

• Manufacturer Part Number: Z8F0822PJ020EG
• Description: IC ENCORE MCU FLASH 8K 28DIP
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F0822PJ020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 19
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 5x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 28-DIP (0.600", 15.24mm)
• Processor Series: Z8F082xx
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 2
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4207; Z8F0822PJ020EG

Table 41. Timer 0–1 Reload High Byte Register (TxRH)
Table 42. Timer 0–1 Reload Low Byte Register (TxRL)
PS022517-0508
BITS
FIELD
RESET
R/W
ADDR
BITS
FIELD
RESET
R/W
ADDR
Timer Reload High and Low Byte Registers
Timer 0–1 PWM High and Low Byte Registers
7
7
TH and TL—Timer High and Low Bytes
These 2 bytes, {TMRH[7:0], TMRL[7:0]}, contain the current 16-bit timer count value.
The Timer 0–1 Reload High and Low Byte (TxRH and TxRL) Registers
16-bit reload value, {TRH[7:0], TRL[7:0]}. Values written to the Timer Reload High Byte
register are stored in a temporary holding register. When a write to the Timer Reload Low
Byte Register occurs, the temporary holding register value is written to the Timer High
Byte Register. This operation allows simultaneous updates of the 16-bit Timer Reload
value.
In COMPARE mode, the Timer Reload High and Low Byte Registers store the 16-bit
Compare value.
TRH and TRL—Timer Reload Register High and Low
These two bytes form the 16-bit Reload value, {TRH[7:0], TRL[7:0]}. This value sets the
maximum count value which initiates a timer reload to
two bytes form the 16-bit Compare value.
The Timer 0–1 PWM High and Low Byte (TxPWMH and TxPWML) registers
and
store the Capture values for the CAPTURE and CAPTURE/COMPARE modes.
Table
6
6
44) are used for Pulse-Width Modulator (PWM) operations. These registers also
5
5
4
4
F02H, F0AH
F03H, F0BH
TRH
R/W
TRL
R/W
1
1
3
3
0001H
2
2
Z8 Encore! XP
. In COMPARE mode, these
Product Specification
1
1
(Table
®
F0822 Series
0
0
41) store a
(Table 43
Timers
79