ST7FLITE39F2M3 STMicroelectronics, ST7FLITE39F2M3 Datasheet - Page 78

• Manufacturer Part Number: ST7FLITE39F2M3
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE39F2M3

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: LINSCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 4
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel
• For Use With: 497-8406 - BOARD STF20NM50FD/STF7LITE39BF2497-8403 - BOARD DEMO STCC08 AC SW DETECTOR497-6398 - BOARD EVAL ST7FLITE39/STM1403497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5514 - EVAL BOARD THERMO CONTROL REFRIG497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Function Descriptions
78/235
}
else
{
}
#endif
/*=========================================================================
=========================================================================*/
#ifdef SPI_ITDRV_WITHOUTBUF_RX
Temp2 = SPI_IsReceptionCompleted() ;
while ((User_Timeout_Function())&&(Temp2 == SPI_RX_DATA_EMPTY))
{
}
if (User_Timeout_Function())
{
}
else
{
}
SPI_GetBuffer(Buff_Test,NbOfBytes_get);
}
while (1) ;
Reception through 'Interrupt Driven wihtout Buffer Mode'
Temp2 = SPI_IsReceptionCompleted() ;
switch (Temp2)
{
}
while (1) ;
case SPI_TRANSMIT_OK:
default:
case (SPI_RX_MODF + SPI_RX_OVR):
case (SPI_RX_MODF):
case (SPI_RX_OVR):
case SPI_RECEIVE_OK:
default:
User_Function();
break;
break;
User_Function();
break;
User_Function();
Rx_Data = SPI_GetByte () ;
break;
Rx_Data = SPI_GetByte ();
break;
User_Function();
break;
/* Any data received before calling this function is ignored */
/* Time-Out elapsed without transmission completion. Error in
/* Time-Out elapsed without reception completion. Error in
communication and user should handle the case */
communication and user should handle the case */
/* Reception of the data in the user buffer */
/* If none of the above condition is met */
/* If none of the above condition is met */
/* User will get the corrupted data */
/* Waits for data byte reception */
/* Transmission successful */
/* Single byte reception */
/* Reception successful */
/* Error Management */
/* Error Management */