LPC2880FET180,551 NXP Semiconductors, LPC2880FET180,551 Datasheet - Page 25

• Manufacturer Part Number: LPC2880FET180,551
• Description: IC ARM7 MCU RAM 16K 180TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2800r

Specifications of LPC2880FET180,551

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 60MHz
• Connectivity: EBI/EMI, I²C, IrDA, MMC, UART/USART, USB
• Peripherals: DMA, I²S, LCD, WDT
• Number Of I /o: 85
• Program Memory Type: ROMless
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.7 V ~ 3.6 V
• Data Converters: A/D 5x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 180-TFBGA
• Processor Series: LPC28
• Core: ARM7TDMI-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: I2C, I2S, UART, USB
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 81
• Number Of Timers: 2
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 5 Channel
• For Use With: OM10092 - EVAL BOARD FOR LPC288X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 568-3245; 935281368551; LPC2880FET180-S

NXP Semiconductors
LPC2880_LPC2888_3
Preliminary data sheet
6.21.6 APBs
6.22 Emulation and debugging
Most peripheral functions are accessed by on-chip APBs that are attached to the higher
speed AHB. The APBs perform reads and writes to peripheral registers in three peripheral
clocks.
The LPC2880/2888 supports emulation via a dedicated JTAG serial port. The dedicated
JTAG port allows debugging of all chip features without impact to any pins that may be
used in the application.
Standard ARM EmbeddedICE logic provides on-chip debug support. The debugging of
the target system requires a host computer running the debugger software and an
EmbeddedICE protocol converter. The EmbeddedICE protocol converter converts the
Remote Debug Protocol commands to the JTAG data needed to access the ARM core.
16/32-bit ARM microcontrollers with external memory interface
Rev. 03 — 17 April 2008
LPC2880; LPC2888
© NXP B.V. 2008. All rights reserved.
25 of 43