PIC18F87K22-I/PTRSL Microchip Technology, PIC18F87K22-I/PTRSL Datasheet - Page 257

• Manufacturer Part Number: PIC18F87K22-I/PTRSL
• Description: MCU PIC 128K FLASH XLP 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F87K22-I/PTRSL

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: EBI/EMI, I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (64K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Processor Series: PIC18F
• Core: PIC
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

20.0
PIC18F87K22 family devices have three Enhanced
Capture/Compare/PWM (ECCP) modules: ECCP1,
ECCP2 and ECCP3. These modules contain a 16-bit
register, which can operate as a 16-bit Capture register,
a 16-bit Compare register or a PWM Master/Slave Duty
Cycle register. These ECCP modules are upward
compatible with CCP
 2010 Microchip Technology Inc.
Note:
ENHANCED
CAPTURE/COMPARE/PWM
(ECCP) MODULE
Throughout this section, generic references
are used for register and bit names that are
the same, except for an ‘x’ variable that indi-
cates the item’s association with the
ECCP1, ECCP2 or ECCP3 module. For
example, the control register is named
CCPxCON and refers to CCP1CON,
CCP2CON and CCP3CON.
Preliminary
PIC18F87K22 FAMILY
ECCP1, ECCP2 and ECCP3 are implemented as stan-
dard CCP modules with enhanced PWM capabilities.
These include:
• Provision for two or four output channels
• Output Steering modes
• Programmable polarity
• Programmable dead-band control
• Automatic shutdown and restart
The enhanced features are discussed in detail in
Section 20.4 “PWM (Enhanced Mode)”.
The ECCP1, ECCP2 and ECCP3 modules use the
control
CCP3CON. The control registers, CCP4CON through
CCP10CON, are for the modules, CCP4 through
CCP10.
registers
CCP1CON,
DS39960B-page 257
CCP2CON
and