PIC24FJ64GB002-I/ML Microchip Technology, PIC24FJ64GB002-I/ML Datasheet - Page 200

• Manufacturer Part Number: PIC24FJ64GB002-I/ML
• Description: IC MCU 16BIT 64KB FLASH 28QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ64GB002-I/ML

• Program Memory Type: FLASH
• Program Memory Size: 64KB (22K x 24)
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 19
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 19
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM240011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Controller Family/series: PIC24
• Ram Memory Size: 8KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Embedded Interface Type: I2C, LIN, SPI, UART, USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FJ64GB004 FAMILY
18.2
Endpoint buffer control is handled through a structure
called the Buffer Descriptor Table (BDT). This provides
a flexible method for users to construct and control
endpoint buffers of various lengths and configurations.
The BDT can be located in any available, 512-byte
aligned block of data RAM. The BDT Pointer
(U1BDTP1) contains the upper address byte of the
BDT, and sets the location of the BDT in RAM. The user
must set this pointer to indicate the table’s location.
The BDT is composed of Buffer Descriptors (BDs)
which are used to define and control the actual buffers
in the USB RAM space. Each BD consists of two, 16-bit
“soft” (non-fixed-address) registers, BDnSTAT and
BDnADR, where n represents one of the 64 possible
BDs (range of 0 to 63). BDnSTAT is the status register
for BDn, while BDnADR specifies the starting address
for the buffer associated with BDn.
FIGURE 18-8:
DS39940C-page 198
Total BDT Space:
Note:
PPB<1:0> = 00
No Ping-Pong
128 bytes
Buffers
USB Buffer Descriptors and the
BDT
Memory area not shown to scale.
EP0 Rx
Descriptor
EP0 Tx
Descriptor
EP1 Rx
Descriptor
EP1 Tx
Descriptor
EP15 Tx
Descriptor
BDT MAPPING FOR ENDPOINT BUFFERING MODES
Ping-Pong Buffer
Total BDT Space:
PPB<1:0> = 01
on EP0 OUT
132 bytes
EP0 Rx Even
Descriptor
EP0 Rx Odd
Descriptor
EP0 Tx
Descriptor
EP1 Rx
Descriptor
EP1 Tx
Descriptor
EP15 Tx
Descriptor
Preliminary
Ping-Pong Buffers
Total BDT Space:
PPB<1:0>0 = 10
on all EPs
256 bytes
indicated by the value of ENDPT3:ENDPT0 in the USB
Depending on the endpoint buffering configuration
used, there are up to 64 sets of buffer descriptors, for a
total of 256 bytes. At a minimum, the BDT must be at
least 8 bytes long. This is because the USB specifica-
tion mandates that every device must have Endpoint 0
with both input and output for initial setup.
Endpoint mapping in the BDT is dependent on three
variables:
• Endpoint number (0 to 15)
• Endpoint direction (Rx or Tx)
• Ping-pong settings (U1CNFG1<1:0>)
Figure 18-8 illustrates how these variables are used to
map endpoints in the BDT.
In Host mode, only Endpoint 0 buffer descriptors are
used. All transfers utilize the Endpoint 0 buffer descriptor
and Endpoint Control register (U1EP0). For received
packets, the attached device’s source endpoint is
status register (U1STAT<7:4>). For transmitted packet,
the attached device’s destination endpoint is indicated
by the value written to the Token register (U1TOK).
EP0 Rx Even
Descriptor
EP0 Rx Odd
Descriptor
EP0 Tx Even
Descriptor
EP0 Tx Odd
Descriptor
EP1 Rx Even
Descriptor
EP1 Rx Odd
Descriptor
EP1 Tx Odd
Descriptor
EP15 Tx Odd
Descriptor
EP1 Tx Even
Descriptor
© 2009 Microchip Technology Inc.
Ping-Pong Buffers
Total BDT Space:
on all other EPs
PPB<1:0> = 11
except EP0
248 bytes
EP0 Rx
Descriptor
EP0 Tx
Descriptor
EP1 Rx Even
Descriptor
EP1 Rx Odd
Descriptor
EP1 Tx Odd
Descriptor
EP15 Tx Odd
Descriptor
EP1 Tx Even
Descriptor