PIC12C671-04I/P Microchip Technology, PIC12C671-04I/P Datasheet - Page 419

• Manufacturer Part Number: PIC12C671-04I/P
• Description: IC MCU OTP 1KX14 A/D 8DIP
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671-04I/P

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-DIP (0.300", 7.62mm)
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Digital Ic Case Style: DIP
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 1
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 4 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMINGAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

22.12
1997 Microchip Technology Inc.
Initialization
Section 22. Basic 8-bit A/D Converter
Example 22-4
Example 22-4:
;
;
;
;
Ensure that the required sampling time for the selected input
channel has elapsed. Then the conversion may be started.
BSF
CLRF
BCF
MOVLW
MOVWF
BSF
BSF
BSF
:
:
shows the initialization of the A/D module in the PIC16C711.
STATUS, RP0
ADCON1
STATUS, RP0
0xC1
ADCON0
INTCON, ADIE
INTCON, GIE
ADCON0, GO
A/D Initialization (for PIC16C711)
; Select Bank1
; Configure A/D inputs
; Select Bank0
; RC Clock, A/D is on, Channel 0 selected
;
; Enable A/D Interrupt
; Enable all interrupts
; Start A/D Conversion
; The ADIF bit will be set and the GO/DONE bit
;
;
is cleared upon completion of the
A/D Conversion.
DS31022A-page 22-17
22