PIC12C671-04/P Microchip Technology, PIC12C671-04/P Datasheet - Page 574

• Manufacturer Part Number: PIC12C671-04/P
• Description: IC MCU OTP 1KX14 A/D 8DIP
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671-04/P

• Program Memory Type: OTP
• Program Memory Size: 1.75KB (1K x 14)
• Package / Case: 8-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 1
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• On-chip Adc: 4-ch x 8-bit
• Data Rom Size: 128 B
• Height: 3.3 mm
• Length: 9.27 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 3 V
• Width: 6.35 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMINGAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
30.3
DS31030A-page 30-4
RC
XT
HS
LP
The shaded sections indicate oscillator selections which are tested for functionality, but not for MIN/MAX specifications.
It is recommended that the user select the device type that ensures the specifications required.
OSC
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 200 kHz max.
DD
PD
DD
PD
DD
PD
DD
PD
DD
DD
DD
DD
: 5 mA max. at 5.5V
: 16 A max. at 4V
: 5 mA max. at 5.5V
: 16 A max. at 4V
: 13.5 mA typ. at 5.5V
: 1.5 A typ. at 4.5V
: 52.5 A typ. at
: 0.9 A typ. at 4.0V
: 4.0V to 6.0V
: 4.0V to 6.0V
: 4.5V to 5.5V
: 4.0V to 6.0V
PIC16CXXX-04
32 kHz, 4.0V
Device Selection Table
This table in the Device Data Sheet is intended to assist you in determining which oscillators are
tested for which devices, and some of the specifications that are tested. Any oscillator may be
selected at time of programming, but only the specified oscillator is tested by Microchip.
Since the RC and XT oscillators are only rated to 4 MHz, they are only tested on the -04 (4 MHz)
devices.
PICmicros rated for 10 MHz or 20 MHz are only tested in HS mode. In
grayed out for the HS mode since there is not an I
oscillator. The value shown is a typical value from characterization.
Battery applications usually require an extended voltage range. Devices marked LC have an
extended voltage range and have the RC, XT, and LP oscillators tested.
Windowed devices are superset devices and have had the oscillators tested to all the specifica-
tion ranges of the -04, -20, and LC devices. The temperature range that the device is tested to
should be considered commercial, though at a later time they may be tested to industrial or
extended temperature levels.
Table 30-2:
Note:
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 10 MHz max.
DD
PD
DD
PD
DD
PD
DD
DD
DD
Not recommended for
: 1.5 A typ. at 4V
: 1.5 A typ. at 4V
: 1.5 A typ. at 4.5V
: 2.7 mA typ. at 5.5V
: 2.7 mA typ. at 5.5V
: 10 mA max. at 5.5V
: 4.5V to 5.5V
: 4.5V to 5.5V
: 4.5V to 5.5V
PIC16CXXX-10
use in LP mode
Devices that are marked with Engineering Sample (ENG SMP) are tested to the cur-
rent engineering test program at time of the device testing. There is no implied war-
ranty that these devices have been tested to any or all specifications in the Device
Data Sheet.
Configurations and Frequencies of Operation (Commercial Devices)
Example Cross Reference of Device Specifications for Oscillator
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 20 MHz max.
DD
PD
DD
PD
DD
PD
DD
DD
DD
Not recommended for
: 2.7 mA typ. at 5.5V
: 1.5 A typ. at 4V
: 2.7 mA typ. at 5.5V
: 1.5 A typ. at 4V
: 20 mA max. at 5.5V
: 1.5 A typ. at 4.5V
: 4.5V to 5.5V
: 4.5V to 5.5V
: 4.5V to 5.5V
use in LP mode
PIC16CXXX-20
PD
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 200 kHz max.
DD
PD
DD
PD
DD
PD
test point within the voltage range of the HS
DD
DD
DD
Not recommended for
: 3.8 mA max. at 3.0V
: 5 A max. at 3V
: 3.8 mA max. at 3.0V
: 5 A max. at 3V
: 48 A max. at
: 5.0 A max. at 3.0V
: 2.5V to 6.0V
: 2.5V to 6.0V
: 2.5V to 6.0V
PIC16LCXXX-04
use in HS mode
32 kHz, 3.0V
1997 Microchip Technology Inc.
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 4 MHz max.
V
I
I
Freq: 20 MHz max.
V
I
I
Freq: 200 kHz max.
Table 30-2
DD
PD
DD
PD
DD
PD
DD
PD
DD
DD
DD
DD
Windowed Devices
: 3.8 mA max. at 5.5V
: 16 A max. at 4V
: 3.8 mA max. at 5.5V
: 16 A max. at 4V
: 20 mA max. at 5.5V
: 1.5 A typ. at 4.5V
: 48 A max. at
: 5.0 A max. at 3.0V
: 2.5V to 6.0V
: 2.5V to 6.0V
: 4.5V to 5.5V
: 2.5V to 6.0V
32 kHz, 3.0V
the I
PD
is