PIC16F685-E/SO Microchip Technology, PIC16F685-E/SO Datasheet - Page 213

• Manufacturer Part Number: PIC16F685-E/SO
• Description: IC PIC MCU FLASH 4KX14 20SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F685-E/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 18
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-SOIC (7.5mm Width)
• For Use With: XLT20SO1-1 - SOCKET TRANS ICE 20DIP TO 20SOICAC162061 - HEADER INTRFC MPLAB ICD2 20PINAC164039 - MODULE SKT PROMATE II 20DIP/SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Connectivity: -

14.4
During an interrupt, only the return PC value is saved
on the stack. Typically, users may wish to save key
registers during an interrupt (e.g., W and STATUS
registers). This must be implemented in software.
Since the upper 16 bytes of all GPR banks are common
in
Figures 2-2 and 2-3), temporary holding registers,
W_TEMP and STATUS_TEMP, should be placed in
here. These 16 locations do not require banking and
therefore, make it easier to context save and restore.
The same code shown in Example 14-1 can be used
to:
• Store the W register
• Store the STATUS register
• Execute the ISR code
• Restore the Status (and Bank Select Bit register)
• Restore the W register
EXAMPLE 14-1:
© 2008 Microchip Technology Inc.
Note:
the
MOVWF W_TEMP
SWAPF STATUS,W
CLRF
MOVWF STATUS_TEMP
:
:(ISR)
:
SWAPF STATUS_TEMP,W
MOVWF STATUS
SWAPF W_TEMP,F
SWAPF W_TEMP,W
Context Saving During Interrupts
The
normally does not require saving the
PCLATH. However, if computed GOTO’s
are used in the ISR and the main code, the
PCLATH must be saved and restored in
the ISR.
PIC16F631/677/685/687/689/690
STATUS
PIC16F631/677/685/687/689/690
SAVING STATUS AND W REGISTERS IN RAM
PIC16F631/677/685/687/689/690
;
;
;
;
;Insert user code here
;
;(sets bank to original state)
;
;
;
Copy W to TEMP register
Swap status to be saved into W
bank 0, regardless of current bank, Clears IRP,RP1,RP0
Save status to bank zero STATUS_TEMP register
Swap STATUS_TEMP register into W
Move W into STATUS register
Swap W_TEMP
Swap W_TEMP into W
(see
DS41262E-page 211