ATTINY20-CCU Atmel, ATTINY20-CCU Datasheet - Page 109

• Manufacturer Part Number: ATTINY20-CCU
• Description: MCU AVR 2KB FLASH 12MHZ 15UFBGA
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY20-CCU

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 12MHz
• Connectivity: I²C, SPI
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 12
• Program Memory Size: 2KB (1K x 16)
• Program Memory Type: FLASH
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Package: 15UFBGA
• Device Core: AVR
• Family Name: ATtiny
• Maximum Speed: 12 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 12
• Interface Type: SPI/TWI
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 2
• Processor Series: ATtiny
• Core: AVR
• Data Ram Size: 128 B
• Maximum Clock Frequency: 12 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

14.1
14.2
14.2.1
8235B–AVR–04/11
Analog Comparator Multiplexed Input
Register Description
ACSRA – Analog Comparator Control and Status Register
When the Analog to Digital Converter (ADC) is configurated as single ended input channel, it is
possible to select any of the ADC[7:0] pins to replace the negative input to the Analog Compara-
tor. The ADC multiplexer is used to select this input. If the Analog Comparator Multiplexer
Enable bit (ACME in ADCSRB) is set, MUX bits in ADMUX select the input pin to replace the
negative input to the analog comparator.
Table 14-1.
• Bit 7 – ACD: Analog Comparator Disable
When this bit is written logic one, the power to the Analog Comparator is switched off. This bit
can be set at any time to turn off the Analog Comparator. This will reduce power consumption in
Active and Idle mode. When changing the ACD bit, the Analog Comparator Interrupt must be
disabled by clearing the ACIE bit in ACSR. Otherwise an interrupt can occur when the bit is
changed.
• Bit 6 – ACBG: Analog Comparator Bandgap Select
When this bit is set, a fixed, internal bandgap reference voltage replaces the positive input to the
Analog Comparator. When this bit is cleared, AIN0 is applied to the positive input of the Analog
Comparator.
• Bit 5 – ACO: Analog Comparator Output
The output of the Analog Comparator is synchronized and then directly connected to ACO. The
synchronization introduces a delay of 1 - 2 clock cycles.
Bit
0x14
Read/Write
Initial Value
ACME
0
1
1
1
1
1
1
1
1
Analog Comparator Multiplexed Input
ACD
R/W
MUX[3:0]
0
7
XXXX
0000
0001
0010
0011
0100
0101
0110
0111
ACBG
R/W
0
6
Analog Comparator Negative Input
AIN1
ADC0
ADC1
ADC2
ADC3
ADC4
ADC5
ADC6
ADC7
ACO
N/A
R
5
R/W
ACI
4
0
ACIE
R/W
3
0
ACIC
R/W
2
0
ACIS1
R/W
1
0
ACIS0
ATtiny20
R/W
0
0
ACSRA
109