HD64F3687GFPV Renesas Electronics America, HD64F3687GFPV Datasheet - Page 193

• Manufacturer Part Number: HD64F3687GFPV
• Description: IC H8 MCU FLASH 56K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3687GFPV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 56KB (56K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-LQFP
• Package: 64LQFP
• Family Name: H8
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 45
• Interface Type: I2C/SCI
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Timer V is an 8-bit timer based on an 8-bit counter. Timer V counts external events. Compare-
match signals with two registers can also be used to reset the counter, request an interrupt, or
output a pulse signal with an arbitrary duty cycle. Counting can be initiated by a trigger input at
the TRGV pin, enabling pulse output control to be synchronized to the trigger, with an arbitrary
delay from the trigger input. Figure 12.1 shows a block diagram of timer V.
12.1
TIM08V0A_000120030300
Choice of seven clock signals is available.
Choice of six internal clock sources ( /128, /64, /32, /16, /8, /4) or an external clock.
Counter can be cleared by compare match A or B, or by an external reset signal. If the count
stop function is selected, the counter can be halted when cleared.
Timer output is controlled by two independent compare match signals, enabling pulse output
with an arbitrary duty cycle, PWM output, and other applications.
Three interrupt sources: compare match A, compare match B, timer overflow
Counting can be initiated by trigger input at the TRGV pin. The rising edge, falling edge, or
both edges of the TRGV input can be selected.
Features
Section 12 Timer V
Rev.5.00 Nov. 02, 2005 Page 159 of 500
Section 12 Timer V
REJ09B0027-0500