STM8S207R8T3 STMicroelectronics, STM8S207R8T3 Datasheet - Page 33

• Manufacturer Part Number: STM8S207R8T3
• Description: MCU 8BIT 64K MEMORY 64-LQFP
• Manufacturer: STMicroelectronics
• Series: STM8Sr

Specifications of STM8S207R8T3

• Core Processor: STM8
• Core Size: 8-Bit
• Speed: 24MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 1.5K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.95 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-LQFP
• Processor Series: STM8S20x
• Core: STM8
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 24 MHz
• Number Of Programmable I/os: 52
• Number Of Timers: 9
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWSTM8
• Development Tools By Supplier: STICE-SYS001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 16
• Height: 1.4 mm
• Length: 10 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.95 V
• Width: 10 mm
• For Use With: 497-10032 - EVAL KIT MOTOR CONTROL STM8S497-10031 - EVAL KIT TOUCH SENSING STM8S497-10592 - BOARD DAUGHTER FOR STM8S207/8497-10593 - KIT STARTER FOR STM8S207/8 SER497-8506 - BOARD EVAL FOR STM8S
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-8941

STM8S207xx, STM8S208xx
5.2
Alternate function remapping
As shown in the rightmost column of the pin description table, some alternate functions can
be remapped at different I/O ports by programming one of eight AFR (alternate function
remap) option bits. Refer to
option is active, the default alternate function is no longer available.
To use an alternate function, the corresponding peripheral must be enabled in the peripheral
registers.
Alternate function remapping does not effect GPIO capabilities of the I/O ports (see the
GPIO section of the family reference manual, RM0016).
Section 8: Option bytes on page
Doc ID 14733 Rev 11
48. When the remapping
Pinouts and pin description
33/105