PIC18LF6310-I/PT Microchip Technology, PIC18LF6310-I/PT Datasheet - Page 241

• Manufacturer Part Number: PIC18LF6310-I/PT
• Description: IC PIC MCU FLASH 4KX16 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF6310-I/PT

• Core Size: 8-Bit
• Program Memory Size: 8KB (4K x 16)
• Oscillator Type: Internal
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 54
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 54
• Ram Memory Size: 768Byte
• Cpu Speed: 40MHz
• No. Of Timers: 4
• No. Of Pwm: RoHS Compliant
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

19.0
The Addressable Universal Synchronous Asynchro-
nous Receiver Transmitter (AUSART) module is very
similar in function to the Enhanced USART module,
discussed in the previous chapter. It is provided as an
additional channel for serial communication with
external devices, for those situations that do not require
Auto-Baud Detection (ABD) or LIN/J2602 bus support.
The AUSART can be configured in the following
modes:
• Asynchronous (full-duplex)
• Synchronous – Master (half-duplex)
• Synchronous – Slave (half-duplex)
 2010 Microchip Technology Inc.
ADDRESSABLE UNIVERSAL
SYNCHRONOUS
ASYNCHRONOUS RECEIVER
TRANSMITTER (AUSART)
PIC18F6310/6410/8310/8410
The pins of the AUSART module are multiplexed with
the
RG2/RX2/DT2, respectively). In order to configure
these pins as an AUSART:
• SPEN bit (RCSTA2<7>) must be set (= 1)
• TRISG<2> bit must be set (= 1)
• TRISG<1> bit must be cleared (= 0) for
• TRISG<1> bit must be set (= 1) for Synchronous
The operation of the Addressable USART module is
controlled through two
RXSTA2. These are detailed in
Register 19-2
Asynchronous and Synchronous Master modes
Slave mode
Note:
functions
The USART control will automatically
reconfigure the pin from input to output as
needed.
respectively.
of
PORTG
registers:
(RG1/TX2/CK2
DS39635C-page 241
Register 19-1
TXSTA2
and
and
and