PIC18LF27J13-I/SS Microchip Technology, PIC18LF27J13-I/SS Datasheet - Page 379

• Manufacturer Part Number: PIC18LF27J13-I/SS
• Description: IC PIC MCU 128KB FLASH 28SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF27J13-I/SS

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 2.75 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: SSOP
• Supply Voltage Range: 1.8V To 3.6V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

23.0
The analog comparator module contains three compar-
ators that can be independently configured in a variety of
ways. The inputs can be selected from the analog inputs
and two internal voltage references. The digital outputs
are available at the pin level and can also be read
through the control register. Multiple output and interrupt
event generation is also available. Figure 23-1 provides
a generic single comparator from the module.
Key features of the module are:
• Independent comparator control
• Programmable input configuration
• Output to both pin and register levels
• Programmable output polarity
• Independent interrupt generation for each
FIGURE 23-1:
 2010 Microchip Technology Inc.
comparator with configurable interrupt-on-change
CCH<1:0>
CxINC
CxIND
CV
CxINB
CxINA
V
CREF
REF
COMPARATOR MODULE
IRV
0
1
2
3
0
1
COMPARATOR SIMPLIFIED BLOCK DIAGRAM
V
V
IN
IN
-
+
CON
Cx
Preliminary
PIC18F47J13 FAMILY
23.1
The CMxCON registers (Register 23-1) select the input
and output configuration for each comparator, as well
as the settings for interrupt generation.
The CMSTAT register (Register 23-2) provides the out-
put results of the comparators. The bits in this register
are read-only.
EVPOL<1:0>
Interrupt
Polarity
CPOL
Logic
Logic
Registers
COE
CxOUT
DS39974A-page 379
CMxIF
COUTx
(CMSTAT<2:0>)