PIC18LF27J13-I/SS Microchip Technology, PIC18LF27J13-I/SS Datasheet - Page 192

• Manufacturer Part Number: PIC18LF27J13-I/SS
• Description: IC PIC MCU 128KB FLASH 28SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF27J13-I/SS

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 2.75 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Digital Ic Case Style: SSOP
• Supply Voltage Range: 1.8V To 3.6V
• Embedded Interface Type: I2C, SPI, USART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18F47J13 FAMILY
11.2.5.2
When chip select is active and a write strobe occurs
(PMCS = 1 and PMWR = 1), the data from PMD<7:0>
is captured into one of the four input buffer bytes.
Which byte is written depends on the 2-bit address
placed on ADDRL<1:0>.
Table 11-1 provides the corresponding input registers
and their associated address.
FIGURE 11-8:
DS39974A-page 192
PMD<7:0>
PMA<1:0>
PMWR
PMPIF
PMRD
PMCS
IBF
WRITE TO SLAVE PORT
PARALLEL SLAVE PORT WRITE WAVEFORMS
Preliminary
When an input buffer is written, the corresponding IBxF
bit is set. The IBF flag bit is set when all the buffers are
written. If any buffer is already written (IBxF = 1), the
next write strobe to that buffer will generate an OBUF
event and the byte will be discarded.
|
Q4
|
Q1
 2010 Microchip Technology Inc.
|
Q2
|
Q3
|
Q4