PIC24HJ12GP202-I/SO Microchip Technology, PIC24HJ12GP202-I/SO Datasheet - Page 95

• Manufacturer Part Number: PIC24HJ12GP202-I/SO
• Description: IC PIC MCU FLASH 4KX24 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ12GP202-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 12KB (4K x 24)
• Package / Case: 28-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24HJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit or 10-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164339 - MODULE SKT FOR PM3 28SOICDV164033 - KIT START EXPLORER 16 MPLAB ICD2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

9.4.3.2
In contrast to inputs, the outputs of the peripheral pin
select options are mapped on the basis of the pin. In
this case, a control register associated with a particular
pin dictates the peripheral output to be mapped. The
RPORx registers are used to control output mapping.
Like the RPINRx registers, each register contains sets
of 5-bit fields, with each set associated with one RPn
pin (see Register 9-10 through Register 9-17). The
FIGURE 9-3:
TABLE 9-2:
© 2007 Microchip Technology Inc.
NULL
U1TX
U1RTS
SDO1
SCK1OUT
SS1OUT
OC1
OC2
Function
Output Mapping
OUTPUT SELECTION FOR REMAPPABLE PIN (RPn)
MULTIPLEXING OF REMAPPABLE OUTPUT FOR RPn
RPnR<4:0>
00000
00011
00100
00111
01000
01001
10010
10011
U1RTS Output enable
U1TX Output enable
OC1 Output enable
OC2 Output enable
U1RTS Output 4
U1TX Output
OC1 Output
OC2 Output
Preliminary
default
default
RPnR<4:0>
RPn tied to default port pin
RPn tied to UART 1 Transmit
RPn tied to UART 1 Ready To Send
RPn tied to SPI 1 Data Output
RPn tied to SPI 1 Clock Output
RPn tied to SPI 1 Slave Select Output
RPn tied to Output Compare 1
RPn tied to Output Compare 2
18
18
19
19
0
0
3
3
4
PIC24HJ12GP201/202
value of the bit field corresponds to one of the periph-
erals, and that peripheral’s output is mapped to the pin
(see Table 9-2 and Figure 9-3).
The list of peripherals for output mapping also includes
a null value of ‘00000’ because of the mapping
technique. This permits any given pin to remain
unconnected from the output of any of the pin
selectable peripherals.
Output Data
Output enable
Output Name
RPn
DS70282B-page 93