PIC16LF87-I/P Microchip Technology, PIC16LF87-I/P Datasheet - Page 4

• Manufacturer Part Number: PIC16LF87-I/P
• Description: IC MCU FLASH 4KX14 EEPROM 18DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16LF87-I/P

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 10MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-DIP (0.300", 7.62mm)
• Controller Family/series: PIC16LF
• No. Of I/o's: 16
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 368Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Processor Series: PIC16LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: SSP, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163014
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Details

PIC16F87/88
6. Module: PORTB, RB6 Pin
DS80171L-page 4
All
Devices
Extended
Devices
During normal operating conditions, extra current
will be consumed on the PIC16F87/88 device’s
power source (V
configured as an analog input (AN5) and is
connected to an analog source. A/D operation on
RB6 or any of the other analog I/O pins will not be
affected by this extra current. The extra current is
due to the T1CKI Schmitt Trigger not being
disabled when RB6 is configured as an analog pin.
The amount of additional current observed will be
dependent on the analog voltage present on the
AN5 pin. The following table illustrates this
additional current across operating temperatures:
Work around
None
Date Codes that pertain to this issue:
All date codes associated with silicon revision B1.
This issue is not found in devices with silicon
revision C2 (Revision ID 0 1000) or later.
Max Units
1.4
1.3
1.1
0.9
mA
mA
mA
mA +125°C
+25°C
+85°C
-40°C
DD
) when the PORTB, RB6 pin is
V
DD
= 5.5V AN5 = 0.6-0.7 V
Conditions
DD
7. Module: PORTB Interrupts
When the PORTB interrupt-on-change feature and
a PORTB peripheral are enabled simultaneously,
the PORTB peripheral input signal’s rising and
falling edges will trigger an interrupt-on-change
event. This is due to the interrupt-on-change
feature not being disabled on the respective pin for
that peripheral when it is enabled.
The affected pins and peripheral signals on
PORTB are RB4: SCK and SCL, RB5: SS and
RB6: T1CKI. The functionality of T1OSI (RB7),
T1OSO (RB6) and TX/CK (RB5) is not affected by
this issue.
Work around
None
Date Codes that pertain to this issue:
All date codes associated with silicon revision B1.
This issue is not found in devices with silicon
revision C2 (Revision ID 0 1000) or later.
© 2008 Microchip Technology Inc.