PIC16LF1933-I/SS Microchip Technology, PIC16LF1933-I/SS Datasheet - Page 137

• Manufacturer Part Number: PIC16LF1933-I/SS
• Description: IC PIC MCU FLASH 4K 28-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1933-I/SS

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP
• Controller Family/series: PIC16LF
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 256Byte
• No. Of Timers: 5
• Interface: EUSART, I2C, SPI
• Embedded Interface Type: AUSART, EUSART, I2C, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

REGISTER 12-7:
REGISTER 12-8:
REGISTER 12-9:
 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
Note 1:
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-6
bit 5-0
Note 1:
R/W-1/1
R/W-x/u
TRISB7
LATB7
U-0
—
Writes to PORTB are actually written to corresponding LATB register. Reads from PORTB register is
return of actual I/O pin values.
When setting a pin to an analog input, the corresponding TRIS bit must be set to Input mode in order to
allow external control of the voltage on the pin.
Unimplemented: Read as ‘0’
ANSB<5:0>: Analog Select between Analog or Digital Function on Pins RB<5:0>, respectively
0 = Digital I/O. Pin is assigned to port or digital special function.
1 = Analog input. Pin is assigned as analog input
TRISB<7:0>: PORTB Tri-State Control bit
1 = PORTB pin configured as an input (tri-stated)
0 = PORTB pin configured as an output
LATB<7:0>: PORTB Output Latch Value bits
R/W-1/1
R/W-x/u
TRISB6
LATB6
U-0
—
TRISB: PORTB TRI-STATE REGISTER
LATB: PORTB DATA LATCH REGISTER
ANSELB: PORTB ANALOG SELECT REGISTER
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W-1/1
R/W-1/1
ANSB5
TRISB5
R/W-x/u
LATB5
R/W-1/1
R/W-1/1
R/W-x/u
TRISB4
ANSB4
LATB4
Preliminary
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
(1)
R/W-1/1
TRISB3
R/W-x/u
R/W-1/1
LATB3
ANSB3
PIC16F193X/LF193X
(1)
. Digital input buffer disabled.
R/W-1/1
R/W-x/u
TRISB2
R/W-1/1
ANSB2
LATB2
R/W-1/1
R/W-1/1
TRISB1
R/W-x/u
ANSB1
LATB1
DS41364D-page 137
R/W-1/1
R/W-1/1
R/W-x/u
ANSB0
TRISB0
LATB0
bit 0
bit 0
bit 0