B82422T1473K EPCOS Inc, B82422T1473K Datasheet - Page 8

• Manufacturer Part Number: B82422T1473K
• Description: INDUCTOR 47UH 60MA 1210 10%
• Manufacturer: EPCOS Inc
• Series: SIMIDr
• Type: Ferrite Corer

Specifications of B82422T1473K

• Inductance: 47µH
• Tolerance: ±10%
• Package / Case: 1210 (3225 Metric)
• Current: 60mA
• Dc Resistance (dcr): 7 Ohm Max
• Q @ Freq: 27 @ 2.52MHz
• Self Resonant Freq: 15MHz
• Mounting Type: Surface Mount
• Frequency - Test: 2.52MHz
• Material - Core: Ferrite
• Applications: General Purpose
• Core Material: Ferrite
• Dimensions: 2.5 mm W x 3.2 mm L x 2.1 mm H
• Shielding: Unshielded
• Test Frequency: 2.52 MHz
• Maximum Dc Current: 60 mAmps
• Maximum Dc Resistance: 7 Ohms
• Self Resonant Frequency: 15 MHz
• Q Minimum: 27
• Termination Style: SMD/SMT
• Inductance Tolerance: ± 10%
• Dc Resistance Max: 7ohm
• Dc Current Rating: 60mA
• Q Test Frequency: 2.52MHz
• Inductor Case Style: 1210
• No. Of Pins: 2
• Svhc: No SVHC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Saturation: -
• Current - Temperature Rise: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 495-1738-2; B82422T1473K000

Power supply
Line impedance
stabilization
network
Selective voltmeter
Spectrum analyzer
Storage oscilloscope
Transient recorder
Selective voltmeter
Fig. 7
2.4
A wide range of legislation and of harmonized standards have come into force and been published
in the field of EMC in the past few years. In the European Union, the EMC Directive 89/336/EEC of
the Council of the European Communites has come into effect on the 1st of January 1996. As of
this date, all electronic equipment must comply with the protection objectives of the EMC Directive.
The conformity with the respective standards must be guaranteed by the manufacturer or importer
in the form of a declaration of conformity. A CE mark of conformity must be applied to all equipment.
As a matter of principle, all electrical or electronic equipment, installations and systems must meet
the protection requirements of the EMC Directive and/or national EMC legislation. A declaration of
conformity by the manufacturer or importer and a CE mark are required for most equipment. Excep-
tions to this rule and special rulings are described in detail in the EMC laws.
New, harmonized European standards have been drawn up in relation to the EEC’s EMC Directive
and the national EMC laws. These specify measurement procedures and limit values or test sever-
ities, both for interference emission and for the interference susceptibility (or rather, immunity to in-
terference) of electronic devices, equipment and systems.
The subdivision of the European standards into various categories (cf. following table) makes it
easier to find the rules that apply to the respective equipment.
The generic standards always apply to all equipment for which there is no specific product family
standard or dedicated product standard.
The basic standards contain information on interference phenomena and general measuring
methods.
General Technical Information
Messempfänger
Spektrumanalysator
Speicheroszillograph
Transientenrekorder
Messempfänger
Netzzuführung
Netz-
Nachbildung
EMC regulations und legislation
Propagation of electromagnetic interference and EMC measurement techniques
Voltage
Rod antenna
Tastkopf
probe
Stabantenne
Stromwandler
Current
probe
V
E
E
U
int
int
S
S
Near field coupling
Nahfeldkopplung
I
int
S
Source
Quelle
16
Broadband dipole antenna
04/00
Breitbandantenne
Rahmenantenne
Loop antenna
P
P
H
H
S
int
S
int
Selective voltmeter
Selective voltmeter
Messempfänger
Messempfänger
H
E
P
I
V
SSB0016-2
int
int
int
int
int
= Magnetic
= Electrical
= Electromagnetic
= Interference current
= Interference voltage
interference fields
interference fields
interference fields
(radiated emission)
SSB0016-2