71918-114LF FCI, 71918-114LF Datasheet - Page 6

• Manufacturer Part Number: 71918-114LF
• Description: CONN HEADER 14POS DUAL VERT PCB
• Manufacturer: FCI
• Series: Quickie™, Basics+r
• Type: PCB Plugr

Specifications of 71918-114LF

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 14
• Number Of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Contact Mating Length: 0.228" (5.80mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Latch Lock/Eject Hooks
• Contact Finish: Gold, GXT™
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Gray
• Agency Approvals: CSA, UL
• Angle: Straight
• Brand/series: Quickie®
• Contact Plating: Gold/GXT™
• Current, Rating: 3 A
• Flammability Rating: UL94V-0
• Length, Overall: 54.86 mm
• Length, Pin: 0.114 "
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Mounting Hole Size: 1.02, 2.8 "
• Number Of Contacts: 14
• Pin Spacing: 2.54 mm
• Special Features: Eject Latch
• Temperature, Operating: -65 to +125 °C
• Voltage, Rating: 1500 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 609-3525; 71918-114LF

TITLE
Quickie™ Connector System
Copyright
Form E-3334
Rev E
FCI
The connector system shall be of two-piece design, consisting of: a molded, straight or right-angle,
shielded header having .64/0.025 diameter or .64/0.025 square header contacts arranged for printed
wiring board termination on a 2.54/0.100 square grid; and a multi-piece receptacle connector having
self-stripping contact terminations for flat, flexible, round conductor cable on a 1.27/0.050 inch center
and either one single-ended or two single-ended cantilever members for interfacing with the header
contact.
NOTE: While the receptacle connector will mate with any .64/0.025 diameter or .64/0.025 square
header contacts on an appropriate grid, performance of such a combination must be determined by
actual test. Minimum pin length is 4.32/.170", maximum pin length is 6.35/.250". Recommended pin
length is 5.84/.230".
3.4.1
3.4.2
3.4.3
3.4.4
Installation.
3.4.1.1
3.4.1.2
Latching Mechanism. An optional latching mechanism shall be available for locking the
plug into the receptacle to withstand service conditions without disconnecting.
Strain Relief. An optional strain relief shall be available to protect the receptacle
terminations against pull and flexing forces.
Polarizing Feature. An optional molded-in polarizing feature shall be available to insure
correct orientation of the receptacle connector and its mating header.
TYPE
PRODUCT SPECIFICATION
Header. The header shall mount on single- or double-sided or multi-
layered printed wiring board of any thickness to + .08/.003 inch (Size 4)
having .89/0.035 + 0.003 diameter holes (Round Pin) or 1.02/.040 +
.08/.003 diameter holes (square pin) on a 2.54/0.0100 square grid. The
termination layout shall be in accordance with the printed wiring
requirements of MIL-STD-275 and MIL-P-55110.
Receptacle. The receptacle shall simultaneously terminate up to 60 wires
size AWG #28 (stranded) or AWG #30 (solid) on 1.27/0.050 inch centers
without pre-stripping the PVC (polyvinylchloride) cable insulation. The
cable shall conform to the requirements of specifications BUS-12-001.
PDM: Rev:F
STATUS:
NUMBER
PAGE
AUTHORIZED BY
CLASSIFICATION
M.Barrios
6 of 20
Released
BUS-12-082
UNRESTRICTED
Printed: Apr 13, 2007
REVISION
DATE
31 Jul 06
F
GS-01-001
.